The objective of the project has been to develop a compact fuel cell generator using methanol as fuel. The DMFC module will be tested as power generator for internal transport using a Mini Crosser
The purpose of the project is to further develop a Danish natural gas reformer system including optimisation of subsystems and the overall system consisting of a natural gas reformer and fuel cell CHP
The project studied the transportation in a small scale pilot grid at the research centre in Hørsholm, Denmark. The test program included steel pipes from the Danish gas transmission grid and polymer
The project objective was to optimise an LT PEM-based ìCHP and UPS system. Both IRD and Dantherm obtained significant project results. The project results regarding MEA performance, lifetime and stack
MEAs constitute the costliest key component and are also crucial to performance and lifetime of the total system. The project focused on developing basic materials and technologies for MEA improvement
One of the main results in this project is the breakthrough in the development of 2.5G cells, which are now leading in terms of performance and stability. Moreover, increased understanding of the
Methanol and ammonia based on biomass may become highly attractive in a future hydrogen system. Methanol can be produced from biomass with total efficiency of 50%. The same number cannot be reached
Metal supported solid oxide fuel cells were developed for operation in temperature interval 550 – 650 degrees C. Fabrication techniques suitable for large scale production of half cells comprising of
The DK-SOFC b line is targeted towards: 1) decrease of the operation temperature without increasing the area specific resistance, 2) increase of the ro-bustness of the cell, 3) better understanding of
The goal of the project was to develop and demonstrate a 3 kWe DMFC generator aimed for Uninterruptible Power Supply. How-ever, a detailed concept evaluation based on the present Danish DMFC stack and
The goal of the project is to develop and test small (2 kW) reformers for converting natural gas into hydrogen for use in Proton Exchange Membrane (PEM) fuel cell cogen units for single-family houses
The project co-financed Danish participation in a European partnership under the 6th framework programme to test whether gas from thermal biomass gasification can be purified sufficiently to be used
The aim of the work is to participate in the IEA Implementing Agreement on Hydrogen (IAH), in order to stimulate and co-ordinate hydrogen activities in Denmark. The work includes: 1) Participation in
The project co-financed Danish participation in a European partnership under the 6th framework programme to test whether gas from thermal biomass gasification can be purified sufficiently to be used
The main purposes of the project were 1) to develop new catalyst materials by applying ‘flame spray deposition’ (FSD); 2) to optimise state-of-the-art MEA materials and electrode structure; 3) to