The aim of the project was to demonstrate ventilated solar walls in practice, including satisfactory architectural and structural adjustment to a certain building.
The aim of this project was to design and build an apparatus for evacuation and assembly of aerogel glazings up to 60 cm x 60 cm based on the proposed method. The key element of the method is the
The present project aims at sustaining a broad scientific expertise, which includes a solid understanding of the climate situation as a whole, and capacity to work out estimates - based on the most
The purpose of the project is to produce the technical basis for dimensioning and developing motor/pump systems, so that the total concept is energy-optimized for domestic heating.
The aims are to make information about Danish energy research and its results available to users in Denmark and abroad and, through international cooperation, to make international research and its
Wave energy test is extended due to an unexpected stop caused by the sinking of the float (due to corrosion). The test is continued in order to obtain sufficient long period of performance data. The
Forskningscenter for Elektroteknisk Energiomformning E/F (CETEC)
EFP
1996
1998
One of the results is, that the separation depend not on the gravitational force itself but on the exponent of the square of the peripheral speed of the centrifuge.
The aim of this project has been to describe and analyse the current proposals for a Norwegian-Swedish, Nordic or northern European power exchange and alternatives, with regard to the consequences for
The project has been carried out as a PhD project, and the dissertation discusses three different issues related to long-term energy demand: 1) the importance of technological change and its
The objective of the project is to develop a suitable method for illuminating the complex connections between the consumption of energy, changes in life style, behavior and social organisation
KORA, Det Nationale Institut for Kommuners og Regioners Analyse og Forskning
EFP
1996
1998
The purpoe of the project was to gather information on the experience of companies that are regulated by two regulatory instruments: Energy agreements and environmental approvals.
Nordtank Energy Group A/S. Udvikling og Konstruktion
EFP
1996
1997
The key target for the proposal is - by combining the latest technology related to generators and power electronics with the latest in wind turbines - to develop a new generation of grid-connected
The objective of the project was to develop new trawls for the Russian fleet, that would save energy per unit of catch through the application of new designs and modern materials.
This project will focus on the possibilities for achieving higher power production, less mechanical stress and a greater degree of flexibility by using both pitch and variable speed control in
The prupose of the project was twofold: to verify a novel rotordesign as studied in previous projects and to manufacture and test a 1 kWh prototype flywheel storage unit with this rotordesign.
A status has been performed within the research area 'Aeroelasticity for Wind Turbines', and on this basis, demands for research and perspectives for a future effort are identified.
The objective is to analyse and describe the edgewise vibrations, which have been observed during stalled operation on Danish and foreign 19 m wind turbine blades, and further to improve the models
IEA International Centre for Gas Technology Information. DK-afdeling
EFP
1996
1998
Development and maintenance of a global information tool (GTI Online) using Internet and World Wide Web. GTI Online's primary target group is the international gas industry, research institutions and
The tape development and characterisations are going on very well, especially the characterisation. The in-situ synchrotron characterisations have been done for the first time in the world. The