RUNE is short for - Reducing Uncertainty of Near-shore wind resource Estimates using onshore lidars. The key project aim is to reduce the uncertainty of offshore wind resources in Danish near-shore
This project aims at testing the Weptos WEC for the first time in an uncontrolled - real sea environment. This will give the opportunity to check the extensive findings from the previous
New cooling technology and newly developed communication and management solution allows access to untapped reserves the telecommunication companies. Reserves that are already established. The way to
A complete up-scaled version of BioSynergi Process' air-staged gasification-CHP system (300 kW electricity / 750 kJ /s of heat) is ready to start test operation in autumn 2014.The project covers the
The purpose of the project is final engineering, drawing, design, production and installation of a Crestwing prototype close to full scale. It will show its potential and demonstrate its high
Solid oxide electrolysis cells (SOECs) are a promising technology for energy storage and synthetic fuel production and it has a unique potential for grid regulation in the Danish power system. This
A main result of the Low Cost Active House BIPV project is to realise a demonstration campaign with 3 MWp, low cost BIPV solutions in connection to low energy class 2020, energy neutral and plus
The goal of SDVP Connect is to mobilize the Heat Pump ITC-platform, developed in collaboration with Energinet.dk and ForskEL, on the Smart Grid market.
Combining silicon solar cells and high efficiency solar cells into one cost-efficient, high-efficiency solar cell has been a dream of the solar industry for decades. However, differences in the
Grid side converter (GSC) is the key for PV integration. GSCs are still not capable of advanced control features that enable the full control of PV systems with fault ride through, reactive power
The overall target for this project is to develop an industrialized concept for Building Integrated Solar PV-BIPV that visualizes a number of added values, minimizes additional costs and thus paves
The project activities have been implemented within the framework of the European OPET Network (Organisations for the Promotion of Energy Technologies), supported by the EU Commission. The OPET
The main goals of the simulation platform can be summarized as follows: 1) To extend the ability of the existing wind turbine design tools to simulate the dynamic behavior of the wind turbines and the
The project purpose is to ensure that a large fraction of the potential for mass- and energyintegration can be exploited in industrial process plants. Today a significant fraction of the potentially
It is the purpose of the project to develop and energy efficient 'straightner' ventilation aggregate with an integrated 'chopper' heat exchanger for single-family houses, buildings of flats, offices
The aim of the project was to test the recently developed VFA online sensor under long-term operation at a large-scale biogas plant (Lintrup). The goal was to identify requirements of the system for
One objective of the project is to investigate the possibilities of developing controlled facade inlets at floor-height for natural ventilation by displacement ventilation, which does not result in
The objective of the project's Phase 1 is to evaluate the possibilities of system solutions with thermoactive constructions acting both as heating and cooling system under Danish conditions and with