The project includes two annual meetings of the working group, where information and ideas are exchanged. BPSE will share the information form the work in IEA-Task 39 in relevant meeting in maritime
The aim of the project is to participate in IEA Hydrogen TCP, in order to stimulate hydrogen R&D activities in Denmark and to co-ordinate Danish and international scientific work on hydrogen and
The purpose of the project is to; develop, build and test a filter system that can process product gas from a gasification process so that this gas is prepared for subsequent use. In addition to this
HyTon is to develop the world’s largest hydrogen compressor, capable of dispensing renewable hydrogen for zero emission cars, busses and trucks at large scale. The increased capacity is to enable
The eFuel project represents a new and better way of producing electro-fuels, building on a well-known technological basis. The project will develop and build a large-scale prototype bio-trickling
The purpose of the Straw2Gas project in full is to demonstrate the use of straw fibres from the JENA straw treatment plant for the production of biogas, and thereby open for a commercial and technical
COBRA Drive has the purpose to advance the Reformed Methanol Fuel cell technology to a level where it can replace diesel engines in Light Commercial Vehicles.
Demonstration of a SOEC-based ammonia synthesis gas production without an air separation unit and use of ammonia in SOFC in parallel with techno-economic studies.
The purpose of the Power2Met project is to develop, design and build a pilot plant for a complete, standardised and modular power-to-methanol plant that can be offered to upgrading biogas plants
Wood is a strongly anisotropic material and likewise the char produced by pyrolysis of wood is characterized by a strong anisotropy. This anisotropic behaviour allows relatively easy transport of gas
The in the EFP 2002 project were related to the development of a 3G cell with a metal suport of ferritic stainless steel and with stability towards redox and thermal cycling.
The 'Clear Views on Clean Fuels' (VIEWLS) project aims to increase our insight into: 1) The economic and environment-technical performances of the various transport biohels, both existing biohels and
The aim is to: verify the final choice of solvent for 'Guideline for Sampling and Analysis of Tar and Particles in Biomass Producer Gas' and to develop an unambiguous method for tar evaporation with
As a continuation of preliminary experiments on super critical water cleaning a process development unit (PDU) for a capacity of 50-60 kg/h will be designed and built.
The activities in the project were: Cell test under extreme conditions, development and analysis of contacting, stability towards redox and thermal cycling, improvements of methods, and development