The purpose of this project is to perform a feasability study on the potential of establishing a full scale demonstration plant that can support a circular energy production on Samsø and help make it
The project is motivated by a need for de-risking of central process steps related to a new application of Hydrofaction for conversion of high ash containing urban waste streams to green
The purpose of developing a small scale version of the Ecodrying Bio-refining plant is to ease the handling of horse manure for individual properties keeping horses and to turn their horse manure into
The aim of the project is to develop an energy-efficient biomass boiler for straw combustion. The boiler must have a high efficiency and low NOx emissions. The goal is to reduce NOx emissions without
The objective of the project is to develop a special wheeled mixer vessel designed for pretreatment of straw and deep litter before utilization in an agricultural biogas plant.
The aim of the project is to provide the best possible technological solution for the production of garden park chips with acceptable technical specifications and at the same time pave the way for a
During production of biogas different malodorous compounds are formed, e.g. hydrogen sulfide (H2S) that, without proper waste air treatment, can be a major nuisance towards neighbors to the biogas
The objective of the project is further development and documentation of the online measurement system into an operational tool for real time monitoring and optimization of the biogas process in
To take a critical lead forward towards a cost effective and sustainable pipeline between the unutilized global bimass resources on one side and the demand for "green" fuel products on the other side
The BE-Clean project will demonstrate a new cleaning process. The process will remove unwanted
sulfur from biogas. The new process is cheaper than currently available technologies and uses
electricity
The objective of BIO-ReFuel is to design, produce and test a small biogas to methanol modular
demonstration plant that can produce 426 liters of methanol from approx. 240 m3 of biogas per
day.
AMMONOX focuses on developing a sustainable and economically attractive, ammonia-based process for a) enhancing the productivity of biogas plants based on manure, b) minimizing NOx emissions from gas
Loss of methane from biogas plants has detrimental environmental effects and reduces the efficiency and economic output of the biogas production. The aim of this project is to reduce the methane loss
This project proposes a bioenergy concept in which cast seaweed collected from beaches will be used as substrate in co-digestion with manure and other wastes in biogas plants for energy production
The vision of the present project is an online Predictive Corrosion Monitoring System (PCMS) that through measurements of few, significant flue gas components can predict and hence optimise the
This project identifies the economic and technical potential and barriers for increased power production and reduced loss of heat on district heat production by means of reduced temperatures and local
In order to reduce emission of the green-house gas CO2, power plants shall increase the use of biomass as fuel in the future. This challenges, however, the flue gas cleaning for the environmentally
The project has focus on spectroscopy analysis of Cl-compounds important in biomass gasification. The project is developed in collaboration between Technical University of Denmark and University
MeGA-stoRE is a Power-to-Gas concept for producing methane from CO2. By operating on electricity, the system enables storage of considerable amounts of RE-resources from the electricity grid as