The purpose of the project is to; develop, build and test a filter system that can process product gas from a gasification process so that this gas is prepared for subsequent use. In addition to this
The purpose of the Straw2Gas project in full is to demonstrate the use of straw fibres from the JENA straw treatment plant for the production of biogas, and thereby open for a commercial and technical
Admixing of alcohols in motor fuels can result in CO2 reductions and even better combustion, but also holds a number of technical challenges. The International Energy Agency wished to create a global
The project will compare next generation biodiesel to current biodiesel. HVO Biodiesel has superior properties compared to the traditional FAME type biodiesel produced by DAKA and Emmelev.
The project focuses on improving the gas yield from animal manure, straw and degassed fiber residues by pre-treatment. The objective is to demonstrate process stability during continuous pilot plant
RETROMAX aims to develop and demonstrate a slurry treatment technology that economically increases the amount of animal slurry/manure based feedstock to biogas plants resulting in a higher biogas
The project aims at testing the Pyroneer technology as a promising platform for improved utilization of a variety of low-value and difficult fuels from different sectors in society in order to produce
Topsoe's new methanol reactor (CONRAD) produces syngas and methanol from biomass. The project will demonstrate that CONRAD works as expected at industrial conditions and investigate how this novel
The purpose of the project is to create a sustainable systemic energy concept based on local CO2 neutral energy sources by integrating biomass based technologies and optimizing the energy flows
The aim of lEA Bioenergy Task 37 is the international collaboration and mutual exchange of research, knowledge and information between the member countries, in the area of production and utilisation
The objective is to develop a system that permits a diesel engine to run on bio-ethanol with high efficiency and low emissions. R&D in system components, catalyst as well as fuel injection and engine
The project develops and demonstrates a new biogas infrastructure consisting of 35 km biogas grid, connectiong 5 farm biogas plants with Skjern Power Supply. This is the first stage in ''Ringkøbing
ComBigaS will develop a biogas plant where the slurry is being produced so the flow of energy is being minimized. The systems are developed with an eye to the standardization and thus facilitate makes
Based on the Stirling engine technology the goal is to demonstrate how small scale RE based CHP plants can be the solution for many small and medium sized companies to reach a more green production
The purpose of the project is to improve the understanding of dioxin formation i WtE-boilers. The project will e.g. include investigation of the possibilities to reduce the part of ash with high
The project has focus on spectroscopy analysis of low-molecular-weight trace gases important in biomass gasification and combustion (e.g. sulphur, PAH’s, chlorine compounds). The purpose of the