Acoustic measurements will be performed at various degrees of wake using several measuring techniques. The results will be compared with aerodynamic measurements to enhance knowledge of wind turbine
The purpose of the project is to demonstrate the use of high efficient heat pumps and solar power (thermal and photovoltaic) in low energy prefabricated dwelling units. These dwellings shall reach the
In this project, by means of computer simulations, flow conditions of wing tips were investigated for a number of wing designs for wind turbines. Various numeric design methodologies were developed
Against the background of the SOL-IND project and experience from Japan, one or more solutions for the integration of PV cell units in highly industrialised housing will be selected. The selected
The project has funded Danish participation in the IEA PVPS programme which provides Danish players with the opportunity to establish international networks as well as to obtain the latest
Current instructional material on solar and light energy for electricity production will be mapped to identify the need for supplementary material and to suggest how existing material can be put to
For the first time ever, this project integrated three design areas in a simulation: electrical design and
optimisation of wind turbines (generator and gearbox), aerodynamic design (material and
This project developed methods and tools for modelling various ruptured wind turine blades and for analysing the residual strength of the blades if they crack. This provides a foundation for assessing
This project involved the first two phases in establishing a knowledge centre for wind turbine components. In the first phase, the knowledge centre was officially established, and it was decided that
The project aims to provide the necessary basis for deciding to establish a knowledge centre promoting Danish innovation in the field of wind turbine components. The purpose of the tesst centre will
The project endeavoured to calculate electricity generation costs in modern onshore wind turbines. At average operating costs of DKK 0.08/0.10/kWh, production costs per kWh can be calculated at DKK 0
To extend the life of gear oil - not least for use in offshore wind turbiens - the project aims to investigate whether nano-filtration using CJC filters (cellulose fibres) with zeolites eliminates the
This project has financed Danish participation in the IEA SHC cooperation on solar cooling. The Danish contribution is a calculation model for the AC-Sun system, which uses new and revolutionary
For this project, The Technical University of Denmark (DTU) has analyzed a number of solar heating systems, examining the energy savings that can be obtained from different systems, houses and energy
The project constituted a phase of the strategic partnership between Risø DTU and the wind turbine industry on developing an aeroelastic design complex. The project worked with the following issues
This project is first phase of a project aiming to determine energy savings in practice for different solar heating systems. Installers and solar collector manufacturers will be invited to install
The project comprises phase 1 of a fact-finding and development programme to ensure relevant offers of PV lessons. The objective is to offer architects, advisers, designers and craftsmen working with
The experience gained in Germany suggests that grid-connected PV units cannot use the standard design optimally under North European conditions. This project collects key data from Danish PV systems
The purpose of the project has been to make a book on the best examples of low-energy buildings in Denmark. The book was completed in autumn 2011 with Solar City Copenhagen as publisher and the Danish