The Megavind Partnership was founded in 2006 and the project 2008-2010 is a continuation of the earlier stages of the partnership. It has been the goal of the partnership to establish the foundation
The aim of the project is to demonstrate a full scale pit heat storage (60.000 m3 ) in combination with a large solar collector field (35.000 m2) and heat pumps (3 MW).
The main goal was to improve solar architecture as well as better qualified architects and better communication and interaction between architects, engineers, manufacturers and clients.
MicroShades are window glass panes with built-in shading based on geometric screening of solar rays, shading direct solar irradiation from the outside while having a clear outlook from the inside. The
The work is a part of the international cooperation to the IEA-Wind Implementing Agreement, and belongs to a new task - Annex 28: Social Acceptance of Wind Energy Projects. The project has collected
The use of air-conditioning in Denmark is strongly increasing. Most new office buildings are equipped with airconditioning plants. Furthermore the new building regulations means an increasing need for
The project wishes to develop and test season heat storage for solar heating plant based on a salt hydrate. A line of experimental and theoretical studies shall help define how the heat storage is
The project aims at developing and demonstrating a new fluent and isolated selling construction for the 10.000m3 water heating storage in Marstal Fjernvarme. The solution is expected to be implemented
This project is motivated by the vision of being able to understand and model complex structural mechanisms and failure in large composite structures such as current and future wind turbine blades
The aim of the project is to measure the collector efficiency and investigate the state of a few old solar collectors for solar heating plants. The collectors, which will be investigated, have been in
This Solar Thermal Action Plan is a follow up on the Solar Thermal Strategy, which showed large potentials for utilization of solar thermal in Denmark. In the Action Plan it is shown how the ambitious
The goal of the project is the continued development and validation of a PowerShade window and facade element, which is a strong solar shading and a semi-transparent solar cell. The core technology is
The project aims at developing a meteorological software tool for large wind farm planning. The project is based on data from previous projects on large wind farm shadow effect. The existing tools
The project focuses on a theoretical and experimental study of floating platforms for wind turbines, wave power systems and the relationship between wind and wave power. The project basis is the
The project aims over a three year period to install approximately 1 MWp of grid connected PV systems on a selection of the municipal buildings targeting coverage of all major building applications, e
The objective is to improve the design basis for large wind turbines by measuring wind and turbulence profiles at high altitude above a flat ground using modern instruments. The project will study
The vision is that the increased research on main wind turbine uncertainties and risk & reliability will lead to less conservative designs and more cost-efficient wind energy. Therefore, careful
The usage of new reinforcement fibre and resin systems allows for novel forms of blade design, cost optimisation and production methods that significantly reduces the production time.