A novel concept for preparation of sulfonate containing fluorinated block copolystyrenes have been developed based on initial ATRP of fluorinated styrene monomers. The strategy depends on well defined
The project proved that PowerShade with an efficiency ratio in excess of 5% can be produced, and that future development will probably further increase its efficiency. The project also showed that the
The present R and D will be used to build a 1:10 scale model of a single AquaBuOY and test and measure its performance in a range of sea conditions at the testsite in Nissum Bredning on 5 meters deep
The project aimed to improve stack technology for solid oxide fuel cell stacks (“SOFC”). The project developed and tested several improved stack components, including improved glass seals and
The Danish experiences with the Stirling engine and updraft gasification was combined with application of the FLOX gas burner technology for the development of the SEDIOX (Stirling Engine with Diluted
The concept of combining solar power, absorption cooling and natural gas-fired small-scale CHP in Strandby met expectations and could be replicated in other CHP plants. However, it is important to
The project analysed ash from eight different agro-industrial biomasses. The ash was examined in physical-chemical analyses and in leaching analyses. The aim was to study and evaluate usability of ash
The project developed new edge sealing for the DSC cell. Made from inert polymer, the sealing is mounted as laminate in controlled conditions. Laboratory experiments and cell exposure to accelerating
This project changed towards possible commercialisation. Consequently, project cooperation was terminated and part of the work transferred to project 6389 ‘Technical silicon for high-efficiency PV
The project goal was to develop stack materials, components and stack technology, including industrially relevant production methods. Further, the project was to perform tests and demonstration of
The wind farm output of an offshore-farm such as Horns Rev changes between nearly constant output to highly variable power output. A balance responsible would benefit from knowing the variability of a
The project aimed to synthesise new deNOx catalysts with improved resistance to flue gas from biomass-fired units. The project studied various new catalyst materials. In particular, synthesis and
The project studied use of information and communication technologies (ICT) in private homes through qualitative interviews, and the consequences for electricity consumption were analysed. Scenarios
The solar shading system development is based on analyses of daylight conditions at different types of solar-shading glass louvres under the IESve/Radiance programme. The chosen system has glass
The CEEH will develop a system to support the planning of Denmark's future energy systems integrating both direct costs and indirect costs for environment, climate and health. The CEEH will apply a
The project will study the effects of using biofuels in the Danish transport sector. The analyses will cover both resources and application of biofuels and include a raft of impacts, eg emissions, air
BioREF project provides an integrated and innovative approach to produce a multi-product biofuel from oilseed crops. The overall purpose is to develop a sustainable, cost-effective and competitive