The project has focus on spectroscopy analysis of low-molecular-weight trace gases important in biomass gasification and combustion (e.g. sulphur, PAH’s, chlorine compounds). The purpose of the
The aim of the Catchcrop2biogas project is to investigate the potential of using catch crops as feedstock for biogas production. This will be done by screening 12 different catch crops samples
Extrusion as a pretreatment of dry biomasses, including deep litter and straw, to increase methane productivity in biogas reactors will be developed and optimised at a biogas plant. A pilot scale
The aim of the project is to make a final energy optimization of an air staged downdraft gasification plant by measures that reduce the output of charcoal and the consequently energy loss from the
The aim of the project is to ensure a technical and economical strong commencement of the operation of a complete entire CHP biomass gasification plant. The additional feed in tariff from the ForskVE
Denmark has a large untapped potential in biogas. Biogas is a cheap renewable energy source that helps to bring down CO2 emissions and increases Denmark’s independence in energy supply. Biogas
The purpose of the project is to analyse high efficiency bio-SNG production technologies, potential available biomass and different aspects of the interaction between the bio-SNG gases and the natural
Development/demonstration of economically viable small CHP plants based on gasification and steam raising through burning of the clean gas in once through steam boilers at high steam temperatures and
The purpose of the project is to investigate the feasibility of electrochemical upgrading of biogas to pipeline quality in Denmark by means of Solid Oxide Electrolyser Cells (SOEC). Computer modelling
The purpose is to clarify advantages and disadvantages of a large biogas grid supplying larger customers. The biogas grid will be connected to the natural gas grid. Some involved subjects are
The main purpose of the project is the development of SO3 in-situ IR measurement technique which will be suitable for industrial applications on SCR units of power plants and proved on an industrial
The aim of project is to investigate the combination of biomass gasification with SOFC in an efficient decentralized and flexible energy system for small scale combined heat and power production. The
The main aim of the project is to investigate and further document the current need for research application on improved electrical efficiency in CHP plants fired with waste on a grate. (Energy 10)
The purpose of the present project is to synthesize, characterize and test new catalysts for Selective Catalytic Reduction of NOx using hydrocarbons instead of ammonia as reductant, including their
AMMONGAS A/S
ForskEL
2010
2011
The purpose of the project is to devellop, demonstrate and verify a cheap type of water/amin scrubbing method for removal of CO2. Leading to a gas so comperatible to natural gas, in respect to
This project will examine the possibilities of continuous monitoring of tar content in product gas from thermal gasification by means of UV-spectroscopy. This will avoid expensive shut downs and
The research project aims at testing and describing relevant steps in the entire biofuel pellet supply chain, including schemes for import of sustainable biofuel pellets, a new competence on-line
A Danish RD&D strategy for thermal biomass gasification will focus and target the Danish technological development efforts within gasification technologies so they can help to meet national targets
The B4C – Biomass for Conversion - consortium will demonstrate the LT-CFB (Low Temperature Circulating Fluidized Bed) technology via a 6 MWth gasifier cofiring difficult biomass into unit 2 at Asnaes