The project endeavoured to calculate electricity generation costs in modern onshore wind turbines. At average operating costs of DKK 0.08/0.10/kWh, production costs per kWh can be calculated at DKK 0
To extend the life of gear oil - not least for use in offshore wind turbiens - the project aims to investigate whether nano-filtration using CJC filters (cellulose fibres) with zeolites eliminates the
The project constituted a phase of the strategic partnership between Risø DTU and the wind turbine industry on developing an aeroelastic design complex. The project worked with the following issues
Aalborg University and Risø/DTU have developed a model to estimate responses and structural reliability of wind turbines under normal operation. Various Monte Carlo simulation algorithms were tested
A number of instruments, Internet, media campaigns, boxes displaying electricity prices (SEE1) and spot contract has been tested for households to shift their electricity consumption to times when
The goal of the project is to develop, test, validate and evaluate a novel control architechture for optimised operation and seamless integration of micro CHP based on a generic virtual plant (VPP)
The project united a wide circle of scientists, experts and industrial partners with varying competences and specific experience to hear their visions for how Denmark should develop new long-term
This project has validated the use of the noise prediction model Nord2000 for more detailed noise prediction from wind farms compared to conventional methods like the ISO 9613-2.
The objectives of this project is to improve on the current practice of basing performance evaluation on a single point measurement of wind speed and instead introduce a method where the wind field
This project has investigated noise emissions from large-scale wind turbines in relation to small-scale wind turbines. In addition, noise nuisance at low frequencies was investigated, noise
The aim of the project is to develop a simulation platform for generation of relevant wind fields applicable for aeroelastic design simulations. This is achieved by development, verification, and
The annex will give the participants an overview of the technical and environmental assessment challenges encountered in offshore applications and help them to understand the areas of further R and D
The wind farm output of an offshore-farm such as Horns Rev changes between nearly constant output to highly variable power output. A balance responsible would benefit from knowing the variability of a
The project has shown that there is potential for particularly demand response energy consumption within the industry. If businesses offer this potential on markets it is required that the payment is
Danish greenhouses have a relatively high level of electricity consumption for grow light. Part of the electricity consumption is flexible, and the main purpose of the project was to find out if the
The object of the project was to determine the wave impact on wind turbines and test ways to reduce such impacts. The project showed that all major wave loads are caused by breaking waves and that
More than 500 households with electric heating participated in a demonstration project about demand response. Participants paid for electricity based on spot prices. The groups notified of the next