National and international research gas not only revealed that the conversion of biomass particles in suspension-fired boilers differs from the conversion of pulverised coal - it has also, through
The long-term vision of the project was to develop a system for online optimisation of waste incineration. The idea is to base the system on advanced measuring technique, dynamic process models and
In situ simultaneous measurements of gas temperature and gas composition are of great interest in combustion research. An optically based technique can be performed in situ for various extremely hard
The purpose of this project is to investigate oxyfuel combustion of biomass and biomass-coal mixtures in semi-technical scale and supplemented by laboratory experiments and process simulations to
During the project, investigations and development has been performed, focusing on an evaluation of the overall feasibility of gasification of solid biomass in general.
In the present project was investigated how and to which extent the effluent from the biogas process has to be purified in order to recirculate this stream as process water in the MaxiFuels process
Due to difficulties in achieving data, consistency in data, and concensus on data as expected and agreed in the project outline among the project partners, the project unfortunately could not be
The objective is to synthesise and transfer to stakeholders important international knowledge and new technical information concerning conventional forestry systems for sustainable production of
Analyse the country-level, regional and global potential of bioenergy, forestation and other biomass based mitigation strategies, including implications for the atmospheric CO2 concentration and
As a specific Danish contribution during the project period, the Bioenergy Group at the University of Southern Denmark updated the report ‘Source separation of organic fraction of household waste’.
Dust will be produced during production and use of wood pellets. The most critical situations will be identified and changes in routines and equipment will be suggested. Both central heat plants and
The present R and D will be used to build a 1:10 scale model of a single AquaBuOY and test and measure its performance in a range of sea conditions at the testsite in Nissum Bredning on 5 meters deep
The Danish experiences with the Stirling engine and updraft gasification was combined with application of the FLOX gas burner technology for the development of the SEDIOX (Stirling Engine with Diluted
The project analysed ash from eight different agro-industrial biomasses. The ash was examined in physical-chemical analyses and in leaching analyses. The aim was to study and evaluate usability of ash