The objective of the project was to improve the use of animal manure for biogas production by a thermo-alcalic hydrolytic pre-treatment. Substantial gas yield improvements have been documented for all
This project will demonstrate erection and operation of an entire biomass gasification plant for CHP production in the commercial size of 1,300 kWth. In the project a complete commercial size forest
The objective of the Light Rotor project is to develop the basis for design of wind turbine blades for use on the order of 10MW rotors with lower weight, tailored aeroelastic response and optimized
The purpose is to develop and validate computer codes related to response simulation on offshore wind turbines and their substructures. It is carried out within the framework of lEA Annex 30
The aim of this project is to develop a wood stove with high energy efficiency and low emissions of pollutants and CO2. We will develop a generic control system for wood stoves and an optimized
Megavind continues to support and consolidate the stronghold of the Danish wind industry through a focused and strategic vector apporach to validation, demonstration, research and education. Megavid
Solum Gruppen has built two versions of an organic waste conversion plant - AIKAN - able to double the energy output of organic waste compared to the current solution, incineration.
The project resulted in the development, design, engineering, construction, and demonstration of a plant for industrial scale use of cereal straw for anaerobic digestion and production of biogas. The
Pretreatment and enzymatic hydrolysis for conversion of biomass to germentable sugars is by far the most expensive step in 2nd generation bioethanol production. The project aims at developing and
The project goal is to accelerate the implementation of large scale torrefaction technology able to produce up to 500.000 ton torrified material per year, thereby supporting the political aim of
The overall objective of the project is to develop a prototype trailing edge flap system for a wind turbine blade. From its present stage of proven functionality under laboratory conditions it is
The objective of this project is to model and explore the influence of atmospheric stability conditions on structural loading and production losses of wind turbines operating in wind farm conditions
The purpose of the project is to introduce and implement a new dynamic data analysis method, DDA, in the Danish wind industry. This method is based on fast measured data rather than traditional 10min
In the following are show the different work packages. After each the timing and goals are shown: WP1 Screening test and optimization of basic parameters for efficient densification of torrefied
The IEA-Task 37, Energy from biogas is an international partnership of knowledge transfer and research exchange, aiming to carry out expert technical work, expert technical support to policy makers
The purpose of the project is to strengthen the Danish contribution to the International Energy Agency project 'IEA Annex 30: Offshore Comparison of Dynamic Computer Codes and Models' with an
The main objective of this project was to prepare the first ever REnescience commercial scale demonstration plant to be ready for operation before 2013.
New energy technologies enabling replacement of fossil fuels must be developed during the next decades. Gasification has been identified is an important contribution. This technology is expected to