It is a concern in wind energy that wind turbines do not yaw efficiently into the wind due to draw backs of nacelle anemometry. The loss of power is estimated to be 1-3% in flat terrain and offshore
During this project an up-scaled, near commercial CatLiq plant has been designed. The plant is capable of converting low value feedstock such as pig manure into a high value bio oil, which can be used
There has been a further development regarding the manufacturing of bio ethanol from straw and other residues, were the production prices has been reduced to 2 kroners per liter bio ethanol.
The main goal of the project was to develop, demonstrate and implement new tools, models and components in the design process for aeroelastic optimization of Mega-Watt wind turbines with the scope of
The objective of the project was to improve the efficiency of anaerobic digestion of dairy cattle manure. The NiX® treatment improved by 48% the methane yield of the second step of the biogas process
One of Dong Energy's subsidiaries, Inbicon, has developed a technology that manufactures bio ethanol from non food sources, such as wheat straw. A demonstration plant is made in this purpose. Markets'
The project has used tools for process simulation to improve understanding of wind turbine blades. Based on the measurements, the project participants designed a new wing, followed by a demonstration
In the project, a chemical reactor system, called OBATE reformer, has been developed to convert ethanol to diethyl ether and water in order to make it into a diesel fuel. It is shown that the
To obtain cost-efficient and environmental-friendly heat supply focus is put on district heating. Requirements to cost-effective biomass combustion technologies for district heating are: 1) High
Development of 2D infrared spectroscopic tomography system for in situ studies of flames and hot gasses. The starting point is 2D reconstruction of temperature and concentration profiles as well as
Meteorological mini-sensors placed on, for example, small model planes constitute a rapidly advancing area. The project will produce a clear picture of existing mini-sensors and the planes and examine
The objective is to develop better extreme wind condition wind atlases usable for wind turbine manufacturers and for locating wind turbines. The key method of the project uses mesoscale modelling to
The objective of the project is to investigate the process during heat treatment of biomass at 230-300 Centrigrades without air, so-called torrefaction, for potential upgrading of biomass for Danish
This project commissions the 500 kW gasifier in the town of Hillerød. The aim is to utilise the experience gathered from the pilot system in the town of Hadsund and develop the system to increase
The objective of the project is to add a time-limited amount to the electricity production settlement price from biomass gasification to allow the project group to demonstrate that, long term, the
WEPROG ApS
ForskEL
2009
2012
The project aims to develop objective methods to allocate reserve and utilize the intra day market in order to reduce the risk of system imbalance during periods of high uncertainty of the weather
The overall objective of the project is to provide a precise determination of the biogas potential and the ultimate methane yield of manure from a broad range of animal categories and how it is
The project develops a simulation platform, including wind, wind turbine main components and power grid. The platform will enable the study of wind turbine performance, and will support key components