Find Projects on our website via the search function on this page.
Displays 141 - 160 of 224
Ørsted A/S
ForskEL
2005
2011
The purpose of this project was to develop materials with higher resistance to the corrosive elements, in order to reduce the cost of maintenance, increase the availability, and increase the
The object of the project was to develop an experimental method for estimating the modal properties of wind turbines during operation. OMA (Operational Modal Analysis) proved suitable for
The objective was to assess the potential of addition of sulphur with a view to emission control in connection with natural gas-firing in swirl-stabilised diffusion burner and in engines and, if
The main purpose of PV Denmark is to continue and enhance the positive development initiated by previous national projects such as Sol-300, Sol-1000 and Sol-2000. The activities shall facilitate, that
The objective of the overall project was to develop a system for online optimisation of waste incineration. Phase 2 worked to design a measuring programme at Haderslev CHP plant to determine the key
The project demonstrated and documented the RECCAT system in full scale on the 1.5 MW Rolls Royce engine of Rask Mølle heating plant. Too small reactor size entailed reduced ability to maintain the
GAIA SOLAR A/S
ForskEL
2006
2011
The project aims at developing a window solution, with integrated solar cells in the glazing, which is 30% cheaper than similar products on the market. Development and production of components is
This project is one of several projects with the common purpose of predicting electricity generation from a wind farm for up to 48-60 hours based on meteorological forecasts.
The work documented in this thesis has had its focus on two main sections. The first part is centred around Maximum Power Point Tracking (MPPT) techniques for photovoltaic arrays, optimised for fast
The PSO Project 5820 aimed to study deposit-induced Cl corrosion under well-controlled laboratory conditions, simulating the conditions in biomass-fired boilers. This was done by exposing pieces of
The aim of this project is to implement an online volatile fatty acids (VFA) sensor developed at E and R DTU for monitoring, control and optimization of the biogas process.
Early 1997, the Executive Committee of IEA SH and CP approved a 2 year extension of Task 20 'Solar Energy in Building Renovation'. The aim of this extension was to develop strategies for an effective
The purpose of this project was to improve our understanding of the characteristics and behaviour of char beds both in steady and unsteady operation. The knowledge gained is to be used for
The main conclusions of the survey are: The potential for biogas production from municipal organic waste in Malawi is scarce; The bioenergy potential of the Malawian agro-industries is large, with the
The present project covers the manufacturing of the prototype aggregate, including two variants of the rotor, as well as the verification of the systems performance.
The study tours to Sweden, Finland, Austria, Italy and the USA have given a good insight in how the other countries are establishing the size classification of comminuted fuel.
KORA, Det Nationale Institut for Kommuners og Regioners Analyse og Forskning
EFP
1997
1998
The database has been constructed and the quality of the data has been controlled. The first econometric analyses of the data have been carried through.
In the work concerning experimental verification of thick airfoils, the focus has been on airfoils used by the industry. The method has been verified with measurements on a NACA 63-215 airfoil
The project is carried out by representatives of the EFP98 applicants who forwarded project proposals regarding concepts related to energy effective exploitation of waste waster sludge.