The goal for this demonstration project to undergo an independent validation of wave energy machine "Rolling Upright" in the wave tank under controlled conditions, and in doing so have developed a
A concept for energy efficient control of air-air heat pumps and electric storage water heaters with focus on indoor clima, energy savings and demand response is developed. A plug n' play-solution for
The purpose of the project is to improve the understanding of dioxin formation i WtE-boilers. The project will e.g. include investigation of the possibilities to reduce the part of ash with high
RESEN ENERGY ApS
ForskEL
2011
2012
Wave energy, Lever Operated Pivoting Float LOPF, study of new taut moored buoy concept with direct electrical output. It will cover: Basic static theoretical optimisation of LOPF concept, design of
The project will develop and demonstrate a new full ceramic SOFC cell concept in a joint approach between materials and processing experts closely together with SOFC cell and stack manufacturers. The
This project utilize the wind and wave energy conversion platform, Poseidon37, for pioneering theoretical and experimental work on modeling and understanding combined floating wind and wave energy
The purpose of the project is to identify limitations of existing simulation and planning tools for distribution grids, with a particular focus on the challenges imposed by the introduction of Smart
The project has focus on spectroscopy analysis of low-molecular-weight trace gases important in biomass gasification and combustion (e.g. sulphur, PAH’s, chlorine compounds). The purpose of the
The goal of the project is to increase the efficiency and reduce emissions for engines operating on biogas and biomass producer gas. Engine operation will be characterised experimentally and
Top up funding for an EU project with European partners. The project is concerned with the details of continuous degradation of SOFC components. Models predicting degradation phenomena and their
This project aims to contribute substantially to the development of a cost effective high temperature electrolysis technology based on solid oxide electrolysis cells (SOECs). The focus will be on
IHSMAG studies the integration of households in the smart grid and develops design recommendations. The Danish part focuses on how electric vehicles are integrated into the everyday life of households
The aim for the proposed project is to analyze and demonstrate the possibilities of utilizing environmental-friendly surplus power production for heat production. Developing and demonstration of the
The aim of the Catchcrop2biogas project is to investigate the potential of using catch crops as feedstock for biogas production. This will be done by screening 12 different catch crops samples
Top up funding to the EU CATION project with Wärtsilä and other European partners. Building on experience with 50 kW demonstration systems, the cathode subsystem is developed and solutions verified
The project vision is to provide wind power with similar grid system interaction characteristics as the conventional generation units. The new technical solutions developed in this project will expand
The project will result in a concept for the information needed, when power consumers are to participate more actively in the power market by making their consumption flexible in time and dependent on
Extrusion as a pretreatment of dry biomasses, including deep litter and straw, to increase methane productivity in biogas reactors will be developed and optimised at a biogas plant. A pilot scale