The project involves the final process design of a full-scale plant for continuous prodiction of second-generation bioethanol based on results from the IBUS pilot plant, where straw is the basic
The purpose of the project is to demonstrate the use of high efficient heat pumps and solar power (thermal and photovoltaic) in low energy prefabricated dwelling units. These dwellings shall reach the
Against the background of the SOL-IND project and experience from Japan, one or more solutions for the integration of PV cell units in highly industrialised housing will be selected. The selected
The project has funded Danish participation in the IEA PVPS programme which provides Danish players with the opportunity to establish international networks as well as to obtain the latest
Current instructional material on solar and light energy for electricity production will be mapped to identify the need for supplementary material and to suggest how existing material can be put to
The project aims to enhance current knowledge of how temperature and pressure during the production process and the water content of biomass affect pellet quality, and of the mechanical properties of
The project continued the activities under the Danish-Canadian project on more cost-efficient second-generation fuel cell systems for the UPS markets and materials handling. In the UPS segment, a 10
Dantherm Power has produced fuel cell systems as emergency power for a large national radio network for emergency preparedness communication. A total of 117 fuel cell systems have been produced on
The project funds Danish participation in two tasks under the IEA's Hydrogen Implementing Agreement, which in addition to the EU member states counts Japan, The USA, Canada and Australia. In Denmark
Optimising the production of SOFC cells and stacks opens up possibilities for testing and demonstrating products in three market segments, distributed electricity production, micro CHP and APU
Through contacts to key players in the biofuels market, various means and policies are considered to identify the most apporpriate package solutions. The results will be used by the European
In this project, tools were developed which offer the possibility of quickly designing layers of fuel cells for various markets and uses. In addition, two reformers were developed which can convert
This project has financed Danish participation in the IEA SHC cooperation on solar cooling. The Danish contribution is a calculation model for the AC-Sun system, which uses new and revolutionary
For this project, The Technical University of Denmark (DTU) has analyzed a number of solar heating systems, examining the energy savings that can be obtained from different systems, houses and energy
Experience from the CHP units in phase 2 will be put to use in the final phase of mCHP to test an additional 100 units at the premises of the two project host teams in Sønderborg and Lolland
During phase 2 of mCHP, 13 beta type CHP units with LT-PEMFC, HT-PEMFC and SOFC-type fuel cells will be tested in Sønderborg and Lolland, respectively. The project industrial team will design and
This project is first phase of a project aiming to determine energy savings in practice for different solar heating systems. Installers and solar collector manufacturers will be invited to install
IEA task 42 identifies existing biorefineries and process potential, prepares common definitions and standards for classifying and assessing technical, financial and environmental advantages and
The project comprises phase 1 of a fact-finding and development programme to ensure relevant offers of PV lessons. The objective is to offer architects, advisers, designers and craftsmen working with
The project develops components with a new composition of materials and more cost-effective production processes for PEM fuel cells to boost performance and reduce costs. The results are demonstrated