The overall objective of this project is to develop a carbon-neutral technology for converting plastic waste to methanol. There is a large carbon dioxide emission reduction potential as both
The project will deliver the knowledge base and precise assumptions needed for Crossbridge and in the future other refineries to make investment decisions to build and operate commercial scale plants
The main purpose of this project is to demonstrate a large-scale pyrolysis process for production of high-quality biochar and energy from common agricultural waste products. The operation of the
The purpose of the project is thus to develop a full-scale flash pyrolysis plant with a capacity of 15 tons of biomass per day. The plant will be developed in continuation of the reactor patent we
The SkyClean Scale-Up project makes it realistic to achieve a pyrolysis-based reduction of greenhouse gas emissions from the Danish agricultural sector of at least 2 million tonnes of CO2e yearly in
PURfection will pursue total recyclability of the high-performance and difficult to replace plastic material polyurethane (PUR). Its excellent performance and extensive range of applications
A new epoch of hyperspectral imaging (HSI) technology is evolving as the technology has gained interest in the recent decade, mainly due to enhanced production methods, improved computing
READY will pursue textile-to-textile recycling, spearheaded by the Danish textile companies Mascot, Bestseller, and Kvadrat. The continuously growing textile production has approximately
We urgently need solutions to reduce our resource consumption and waste created. We all see in our everyday cooking how plastic waste piles up with 31 kg of plastic waste produced per EU
The aim is to develop an integrated technology for organic waste treatment resulting in significantly lower carbon footprint approximately 1-2 kg eq. of CO2 for proteinous feed production by
Hyperspectral imaging using broadband light sources is very important to textiles and meat. Textile recycling is a growing industry due to its immense pollution of microplastics and chemicals
It is the goal to increase the fundament for optimising pellet production and give relations between the quality of the pellet and the conditions during the production.
The aim of the MaxiFuels project is the pilot-scale testing and further developemnt of the 2nd generation concept for bioethanol production from lignocellulosic biomass with the production of biogas
The purpose of this project was to show that condensing flue gasses after filtration in a bag filter is an economical and environmental friendly solution for straw fired heating plants.
The opbejctive of the project has been to improve design and process stability in biogas plants. The results can be divided within the following main categories: 1) Pre-treatment, serial coupling of
Co-digestion of manure with fatty waste may improve biogas production and thus the economy of manure-based biogas plants. However, fat is potentially inhibiting for the biogas process, and biogas
The objective of the project was to study new deNOx catalysts with improved alkali resistance in relation to flue gas from biomass-fired facilities. Alkali resistance of three types of catalysts is so
Experimental investigations were conducted on two identical small-scale SI gas engine generator sets operating on biomass-produced gas from thermal wood gasification. The engines operated with two