The purpose of this project is to perform a feasability study on the potential of establishing a full scale demonstration plant that can support a circular energy production on Samsø and help make it
The project is motivated by a need for de-risking of central process steps related to a new application of Hydrofaction for conversion of high ash containing urban waste streams to green
The purpose of developing a small scale version of the Ecodrying Bio-refining plant is to ease the handling of horse manure for individual properties keeping horses and to turn their horse manure into
The aim of the project is to develop an energy-efficient biomass boiler for straw combustion. The boiler must have a high efficiency and low NOx emissions. The goal is to reduce NOx emissions without
The objective of the project is to develop a special wheeled mixer vessel designed for pretreatment of straw and deep litter before utilization in an agricultural biogas plant.
The aim of the project is to provide the best possible technological solution for the production of garden park chips with acceptable technical specifications and at the same time pave the way for a
During production of biogas different malodorous compounds are formed, e.g. hydrogen sulfide (H2S) that, without proper waste air treatment, can be a major nuisance towards neighbors to the biogas
The objective of the project is further development and documentation of the online measurement system into an operational tool for real time monitoring and optimization of the biogas process in
To take a critical lead forward towards a cost effective and sustainable pipeline between the unutilized global bimass resources on one side and the demand for "green" fuel products on the other side
The BE-Clean project will demonstrate a new cleaning process. The process will remove unwanted
sulfur from biogas. The new process is cheaper than currently available technologies and uses
electricity
The objective of BIO-ReFuel is to design, produce and test a small biogas to methanol modular
demonstration plant that can produce 426 liters of methanol from approx. 240 m3 of biogas per
day.
The vision of PCMS - Task 2 is an online Predictive Corrosion Monitoring System (PCMS) that through measurements of few, significant flue gas components can predict and hence optimise the corrosion
MicrobStopNH3 project will use bioaugmentation of ammonia tolerant methanogenic consortia to enhance methane production up to 35 pct in a large-scale biogas reactor suffering from ammonia toxicity
The project aims at supporting an efficient and fast conversion of pulverized coal-fired power plants from operation on coal to biomass pellets. The focus is to investigate key issues that can ensure
The project will evaluate the influence of materials microstructure on biomass corrosion in CHP plants. Models of biomass corrosion related to fuel, material and environment will be developed. Results
A complete up-scaled version of BioSynergi Process' air-staged gasification-CHP system (300 kW electricity / 750 kJ /s of heat) is ready to start test operation in autumn 2014.The project covers the
The objective of the project is to demonstrate an up to 50% increase in biogas production by use of the AD Booster system at commercial scale using various types of organic fibres, such as straw and o
The purpose of the project is to demonstrate the REnescience technology in full scale as an integrated part of a total waste processing system including use of the biodegradable part for biogas and