The development of evacuated glazings approaches prototype production. Thus the basis for decision-making for commercial production will be created within approx. a year and a half.
Coordination of all Danish CADDET activities. Mailing of CADDET Newsletters, brochures and similar material. Organization of CADDET register inputs and liasion activities to the CADDET Centre and
The activities in 1996 has to a large degree followed the budget proposal of 27 June 1995. During the year two IEA Executive Committee meeting were held, first in Finland and then in Germany. The
The aim of the project was to demonstrate ventilated solar walls in practice, including satisfactory architectural and structural adjustment to a certain building.
The aim of this project was to design and build an apparatus for evacuation and assembly of aerogel glazings up to 60 cm x 60 cm based on the proposed method. The key element of the method is the
The purpose of the project is to produce the technical basis for dimensioning and developing motor/pump systems, so that the total concept is energy-optimized for domestic heating.
Wave energy test is extended due to an unexpected stop caused by the sinking of the float (due to corrosion). The test is continued in order to obtain sufficient long period of performance data. The
Forskningscenter for Elektroteknisk Energiomformning E/F (CETEC)
EFP
1996
1998
One of the results is, that the separation depend not on the gravitational force itself but on the exponent of the square of the peripheral speed of the centrifuge.
Nordtank Energy Group A/S. Udvikling og Konstruktion
EFP
1996
1997
The key target for the proposal is - by combining the latest technology related to generators and power electronics with the latest in wind turbines - to develop a new generation of grid-connected
The objective of the project was to develop new trawls for the Russian fleet, that would save energy per unit of catch through the application of new designs and modern materials.
This project will focus on the possibilities for achieving higher power production, less mechanical stress and a greater degree of flexibility by using both pitch and variable speed control in
A status has been performed within the research area 'Aeroelasticity for Wind Turbines', and on this basis, demands for research and perspectives for a future effort are identified.
The objective is to analyse and describe the edgewise vibrations, which have been observed during stalled operation on Danish and foreign 19 m wind turbine blades, and further to improve the models
A study has been performed, which investigated the possible application of Doppler laser anemometry for performance assessment and control of wind turbines.
The aim is to analyse and evaluate appropriate means of establishing a working interaction between different intelligent components, e.g. for energy management purposes. The interaction between
The main objective of the Task is to promote daylight-conscious building design with the aim of realising energy savings and visual comfort and amenity value of the building.
The bulletin presents a method for calculating the gross energy consumption of a building. The net heat demand for space heating, ventilation and domestic hot water should be calculated. Next