The annex will give the participants an overview of the technical and environmental assessment challenges encountered in offshore applications and help them to understand the areas of further R and D
The overall strategic objective of PV-ERA-NET is to strengthen Europe's position in photovoltaic (PV) technology by improving the co-operation and co-ordination of PV RTD programming efforts across
The objective of the project has been to achieve a 10% better price performance for ARCON's HT-SA solar collector and to demonstrate the solar collector and measure the production result.
The project included the second phase of a process aimed at establishing a platform for wind turbine simulation as a prerequisite for advanced electrical design and optimisation.
The aim of the project is to develop, verify and implement a detailed physical model for the wind field in a wind farm. The model will allow for detailed aeroelastic simulation of wind turbines sited
The overall objective of the project is to ensure the development of an aetoelastic design complex, which can create the basis for the nest generation of wind turbines and make new design trends
The overall goal with the participation in IEA PVPS is to maintain and build upon the knowledge transfer to Denmark via the participation in the IEA PVPS work.
The aim of the project is to develop and to demonstrate integrated PV options for standard single-family houses with a high degree of industrialized production. This implies the development of an
This project, HAVDIM2004, aimed primarily at analysing already accessible measurement data from the two Danish offshore wind farms Horns Rev 1 and Nysted Offshore Wind Farm. The project focused on
The project developed a PV cell roof based on a modified industrial installation system for commercial nurseries. Components are non-framed PV cell modules with several novel features, including front
A three-dimensional chemical mapping of active plastic PV cell layers has generated new knowledge of degradation causes for PV cells. Based on the mapping, more stable PV cells were made, which in
The project generated results in selected areas of flexible multibody wind turbine modelling. Monte Carlo statistical response simulations and failure probabilities require significantly reduced
In DTU's and LM Wind Power's wind tunnel, the project performed several measurements of the flow behind vortex generators (VG). The project proved that the induced vortices effectively counteract
The project will continue developing a computer model capable of predicting defect concentrations and distributions as a function of parameters during the float-zone process that produces silicon for
The project aimed substantially to strenghten the scientific basis for the wind turbine sector in general with particular focus on the Danish sector’s position in offshore wind farms. To meet these
This project demonstrated that further improvement and automation of wind power predictions within a 48-hour horizon is possible if the underlying tools such as WPPT (Wind Power Prediction Tool)
The object of this project was to show the existence of high-frequency fluctuations. The measurement of these fluctuations and the subsequent frequency analyses revealed that these frequencies may be