Building on the results achieved in a first EUDP project, the purpose of this project is to finalise the development and testing of the technologies needed to produce extra – tall 3D printed wind
Power Curve, the Technical University of Denmark and Statkraft collaborate in order to develop a trailing edge serration product for wind turbine blades that offers increased noise reduction fea-tures
The purpose of the Thunderbolt project is to be able to deliver a fully commercialized service on subscription to the wind energy market after successful project execution, making it possible to
The project is dedicated to enhancing the efficiency and cost-effectiveness of foundation design for offshore structures such as windfarms and energy islands. The envisioned solution involves the
The project allows Floating Power Plant (FPP) to optimise and further develop novel floating wind concepts. The output will be three large demonstration activities and six innovations, including a
Silver's use in PV cell metallization is contributing to a future silver shortage, hence necessitating a shift towards alternatives like copper. However, copper plating presents challenges including
Aeromine is a novel, building integrated windenergy system intended to compete with or supplement industrial rooftop solar PV. The EUDP project will improve the understanding of- and demonstrate how
Formålet med projektet er, at have mere pålidelige WTG-vinger i drift med forlænget levetid, sænke OPEX og optimere AEP, gennem anvendelsen af en risikobaseret tilgang. Hvis vingerne kan forblive i
Acoustic measurements will be performed at various degrees of wake using several measuring techniques. The results will be compared with aerodynamic measurements to enhance knowledge of wind turbine
The purpose of the project is to demonstrate the use of high efficient heat pumps and solar power (thermal and photovoltaic) in low energy prefabricated dwelling units. These dwellings shall reach the
In this project, by means of computer simulations, flow conditions of wing tips were investigated for a number of wing designs for wind turbines. Various numeric design methodologies were developed
Against the background of the SOL-IND project and experience from Japan, one or more solutions for the integration of PV cell units in highly industrialised housing will be selected. The selected
The project has funded Danish participation in the IEA PVPS programme which provides Danish players with the opportunity to establish international networks as well as to obtain the latest
Current instructional material on solar and light energy for electricity production will be mapped to identify the need for supplementary material and to suggest how existing material can be put to
For the first time ever, this project integrated three design areas in a simulation: electrical design and
optimisation of wind turbines (generator and gearbox), aerodynamic design (material and
This project developed methods and tools for modelling various ruptured wind turine blades and for analysing the residual strength of the blades if they crack. This provides a foundation for assessing
This project involved the first two phases in establishing a knowledge centre for wind turbine components. In the first phase, the knowledge centre was officially established, and it was decided that
The project aims to provide the necessary basis for deciding to establish a knowledge centre promoting Danish innovation in the field of wind turbine components. The purpose of the tesst centre will
The project endeavoured to calculate electricity generation costs in modern onshore wind turbines. At average operating costs of DKK 0.08/0.10/kWh, production costs per kWh can be calculated at DKK 0
To extend the life of gear oil - not least for use in offshore wind turbiens - the project aims to investigate whether nano-filtration using CJC filters (cellulose fibres) with zeolites eliminates the