The objective of the project was to study new deNOx catalysts with improved alkali resistance in relation to flue gas from biomass-fired facilities. Alkali resistance of three types of catalysts is so
Experimental investigations were conducted on two identical small-scale SI gas engine generator sets operating on biomass-produced gas from thermal wood gasification. The engines operated with two
The project was the first of a total of five phases, aimed at better understanding and modelling of the dioxin-formation mechanisms in waste-incineration plants. New insight was gained, which may
In connection with thermal gasification of solid biomass, the pollution level of the gas must often be determined. Undesirable components in the gas may include solid matter (particles, salts, soot)
X-ray analysis is a conditional method usable for characterising biomass and biomass ash. The most striking finding is that analysis values for the element silicon deviated consistently and
Den langsigtede vision med projektet er et fuldautomatiseret system, som udnytter en bred front af avanceret måleinformation, avancerede dynamiske modeller til forudsigelse af driftsforløb og
The project follows up four previous projects on biofuels and health and safety at work and focuses on: 1. Method development for airborne dust capture to study any health effects of biofuel dust. 2
The project focused on improving the Open Core gasification unit, particularly reducing the daily monitoring jobs and ensuring stable, unmanned unit operation. A subproject focused on gaining better
The primary objective of the project was to improve the understanding of formation and characteristics of waste incineration residue. The project had specific focus on the importance of waste input
Ørsted A/S
ForskEL
2005
2011
The purpose of this project was to develop materials with higher resistance to the corrosive elements, in order to reduce the cost of maintenance, increase the availability, and increase the
The objective was to assess the potential of addition of sulphur with a view to emission control in connection with natural gas-firing in swirl-stabilised diffusion burner and in engines and, if
The objective of the overall project was to develop a system for online optimisation of waste incineration. Phase 2 worked to design a measuring programme at Haderslev CHP plant to determine the key
The PSO Project 5820 aimed to study deposit-induced Cl corrosion under well-controlled laboratory conditions, simulating the conditions in biomass-fired boilers. This was done by exposing pieces of
The aim of this project is to implement an online volatile fatty acids (VFA) sensor developed at E and R DTU for monitoring, control and optimization of the biogas process.