The objective is to demonstrate on existing centralised biogas plants how biogas production can be increased and regulated by supplying solid fractions from manure and storable plant material
Through participation in the executive committee and a number of annexes in IETS, comprising 13 countries, Denmark has contributed to developing technologies for energy-efficiency enhancement in
During this project an up-scaled, near commercial CatLiq plant has been designed. The plant is capable of converting low value feedstock such as pig manure into a high value bio oil, which can be used
There has been a further development regarding the manufacturing of bio ethanol from straw and other residues, were the production prices has been reduced to 2 kroners per liter bio ethanol.
The objective of the project was to improve the efficiency of anaerobic digestion of dairy cattle manure. The NiX® treatment improved by 48% the methane yield of the second step of the biogas process
One of Dong Energy's subsidiaries, Inbicon, has developed a technology that manufactures bio ethanol from non food sources, such as wheat straw. A demonstration plant is made in this purpose. Markets'
In the project, a chemical reactor system, called OBATE reformer, has been developed to convert ethanol to diethyl ether and water in order to make it into a diesel fuel. It is shown that the
To obtain cost-efficient and environmental-friendly heat supply focus is put on district heating. Requirements to cost-effective biomass combustion technologies for district heating are: 1) High
The main purpose of the EUDP-project is to develop and demonstrate an LED based prototype lighting fixture that will revolutionize greenhouse lighting as we know it. This objective will be reached
The objective of the project is to make a 24 m long 1:10 scale version of a Leancon wave power machine that uses airflows created by a wave moving up and down a tube. The project is based on a
Development of 2D infrared spectroscopic tomography system for in situ studies of flames and hot gasses. The starting point is 2D reconstruction of temperature and concentration profiles as well as
The objective of the project is to investigate the process during heat treatment of biomass at 230-300 Centrigrades without air, so-called torrefaction, for potential upgrading of biomass for Danish
The project aims at optimising Wave Star wave machine production from irregular waves through sophisticated control of the back pressure in the hydraulic system in each floater. The system is being
This project commissions the 500 kW gasifier in the town of Hillerød. The aim is to utilise the experience gathered from the pilot system in the town of Hadsund and develop the system to increase
The objective of the project is to add a time-limited amount to the electricity production settlement price from biomass gasification to allow the project group to demonstrate that, long term, the
The overall objective of the project is to provide a precise determination of the biogas potential and the ultimate methane yield of manure from a broad range of animal categories and how it is
The project is to investigate oxy-combustion of natural gas via advanced modeling. The main contents are: (1) to develop new models for gaseous radiative properties applicable to oxy-fuel combustion;
De Nationale Geologiske Undersøgelser for Danmark og Grønland
Innovationsfonden
2010
2016
The project will analyse all available relevant geological and geophysical data. New data and models will be generated to identify, map and characterise suitable potential geothermal reservoirs, and