Through participation in the executive committee and a number of annexes in IETS, comprising 13 countries, Denmark has contributed to developing technologies for energy-efficiency enhancement in
HyLIFT-DEMO is to conduct European demonstration of the 3rd generation hydrogen powered fuel cell forklifts and supporting hydrogen refuelling infrastructure. HyLIFT-DEMO has the following objectives
LINK2009 -phase 2 is a continuation of the LINK2009 Phase 1 that was started in August 2008 with support from EUDP2008 (ENS 63011-0069) covering development of 2nd generation fuel cell hybrid vehicles
The main objective in this project has been to develop a tool for SOFC system designing with the aim to accelerate the system optimization and reduce the time to market.
The objectives of the project is to break down the barriers for energy renovation of private owned houses in Denmark by: assisting in further development of 4 key energy technologies, exploiting their
Only the nichemarket is accepting the relatively high prices there is to fine within the fuel cell stack. The high develop costs is holding the stack producers in a spiral characterized by its low
It is theoretically possible to achieve a reduction of 19% of the total agriculture's energy consumption by reducing the energy consumption for heating and for electric motors according to reduction
The objective of the project is to promote the use of district heating driven adsorption heat pumps in Denmark. The goal is to ensure that the benefits of adsorption heat pumps, solar energy and
It is a concern in wind energy that wind turbines do not yaw efficiently into the wind due to draw backs of nacelle anemometry. The loss of power is estimated to be 1-3% in flat terrain and offshore
During this project an up-scaled, near commercial CatLiq plant has been designed. The plant is capable of converting low value feedstock such as pig manure into a high value bio oil, which can be used
The purpose of the project is to develop demonstrate and document a new renovation concept for existing multi storey housing, reducing the energy demand to Low Energy Class 1. Results are disseminated
There has been a further development regarding the manufacturing of bio ethanol from straw and other residues, were the production prices has been reduced to 2 kroners per liter bio ethanol.
The main goal of the project was to develop, demonstrate and implement new tools, models and components in the design process for aeroelastic optimization of Mega-Watt wind turbines with the scope of
The objective of the project was to improve the efficiency of anaerobic digestion of dairy cattle manure. The NiX® treatment improved by 48% the methane yield of the second step of the biogas process
GMR machines and a couple of project participants will develop a prototype and a pilot series of fuel cell driven electrical car. The energy source for the electrical cars comes from a HT-PEM fuel
One of Dong Energy's subsidiaries, Inbicon, has developed a technology that manufactures bio ethanol from non food sources, such as wheat straw. A demonstration plant is made in this purpose. Markets'
The purpose of the project is to develop technologies, which can optimize the thermal storage of concrete constructions. The concrete is being tested in full scale in EnergyFlexHouse at the institute
The project has used tools for process simulation to improve understanding of wind turbine blades. Based on the measurements, the project participants designed a new wing, followed by a demonstration