This project aims at testing the Weptos WEC for the first time in an uncontrolled - real sea environment. This will give the opportunity to check the extensive findings from the previous
A complete up-scaled version of BioSynergi Process' air-staged gasification-CHP system (300 kW electricity / 750 kJ /s of heat) is ready to start test operation in autumn 2014.The project covers the
The purpose of the project is final engineering, drawing, design, production and installation of a Crestwing prototype close to full scale. It will show its potential and demonstrate its high
The purpose is to secure a strong Danish representation in the international committee working with standardization through IEC TC-114. The project secures, that Denmark will be able to influence and
This project will develop oxygen blown biomass gasification combined with oxygen transport membranes (OTMs) for efficient conversion of waste biomass to electrical energy. During the project, a 1st
Using electric alternating gasification, wood chips can be converted to syngas, which is used to increase methane production in a biogas process. The uniquely produced gas in not diluted with nitrogen
This project includes completion of project 2008-1-0164 "Selective Hydrolysis of Sludge, phase 2".The mentioned project showed profound effect of Selective Hydrolysis on digestion and biogas
AMMONOX focuses on developing a sustainable and economically attractive, ammonia-based process for a) enhancing the productivity of biogas plants based on manure, b) minimizing NOx emissions from gas
Loss of methane from biogas plants has detrimental environmental effects and reduces the efficiency and economic output of the biogas production. The aim of this project is to reduce the methane loss
This project proposes a bioenergy concept in which cast seaweed collected from beaches will be used as substrate in co-digestion with manure and other wastes in biogas plants for energy production
The vision of the present project is an online Predictive Corrosion Monitoring System (PCMS) that through measurements of few, significant flue gas components can predict and hence optimise the
This project identifies the economic and technical potential and barriers for increased power production and reduced loss of heat on district heat production by means of reduced temperatures and local
In order to reduce emission of the green-house gas CO2, power plants shall increase the use of biomass as fuel in the future. This challenges, however, the flue gas cleaning for the environmentally
The project has focus on spectroscopy analysis of Cl-compounds important in biomass gasification. The project is developed in collaboration between Technical University of Denmark and University
Weptos A/S receives the award "Årets bedste ForskEL projekt 2012" for best energy research project awarded by Energinet.DK. The award was given to Weptos A/S for an excellent and professionally
The purpose of this project is to demonstrate and optimize the design of a 5 kW grid connected wave energy LOPF (Lever Operated Pivoting Float) buoy, through a design study and subsequent test in the
Pre-study to design and demonstrate, in small scale, cost effective solutions for 3 commonly identified challenges in the wave power industry, which typically involves floating devices. High efficient
MeGA-stoRE is a Power-to-Gas concept for producing methane from CO2. By operating on electricity, the system enables storage of considerable amounts of RE-resources from the electricity grid as
Electrochaea is developing an efficient and robust biological process to store low-cost electricity as renewable gas in the existing natural gas infrastructure. The P2G-BioCat project will allow us to