The consortium will improve the energy collectors and energy efficiency on the most weight and cost-efficient wave energy system currently in development. The EUDP project targets the primary CAPEX
The aim of this project is to design, test, optimize and prepare for an industrial scale demonstration of microwave cracking technology, converting biomass to biofuels and biochar for carbon storage
The primary objective of the project is to address the pressing issue of methane emissions in the biogas sector by developing and implementing an innovative methane detection drone and measurement
The overall objective of this project is to develop a carbon-neutral technology for converting plastic waste to methanol. There is a large carbon dioxide emission reduction potential as both
The purpose of this project is to implement the next phase in the Exowave strategy, which is to be able to establish a 250 MW wave power plant together with an offshore wind farm before 2030 in Danish
The purpose of this project is to make Crestwing completely ready for its first commercially viable device. With the final demonstration of Crestwing’s 30-meter, 65 tons prototype “Tordenskiold”, the
The project will deliver the knowledge base and precise assumptions needed for Crossbridge and in the future other refineries to make investment decisions to build and operate commercial scale plants
The SkyClean technology combines biofuel production and carbon capture and storage. It is an integrated solution to three major climate change challenges on a global scale: reducing greenhouse
The objective of Sluge2Fuel is to demonstrate the world’s first full scale integration of a modular Hydro Thermal Liquefaction (HTL) unit in a modern Wastewater Treatment Plant (WWTP) and to validate
The objective of the CooCE project is to establish biotechnological processes, for converting CO2 into upgraded biofuels (biomethane) for on-site hybrid energy storage and value-added platform
The BiogasOil Project aims to articulate the advantages of the integration of biogas and bio-oil production at the same site. The BiogasOil Project includes a program of biocrude production, process
The MOSS project is a an importent step on the path to commercializin a new and very promising technology for energy storage. The pilot plant will integrate all central systems required for the
The aim of the BioLens project is to establish a new standard and platform for digital traceability of guarantees of origins on volumes traded biomethane throughout Europe.
The objective of this project is to develop, design, build, test, optimize and commission FPPs first full-scale wave PTO system. The resulting PTO design will be used to build four identical PTO units
The first purpose is to optimize and demonstrate Exowave wave energy concept in a coastal offshore environment, where the produced seawater under high pressure is led ashore and converted to fresh
Efforts to change road transport is focused on electrifying the transport sector. The main disadvantages of this strategy are that it requires replacing the existing vehicle fleet and an entirely new
The main purpose of this project is to develop and demonstrate an optimized heating plant that will have much higher efficiency and much less CO2 emissions than the heating plants that are built today
The purpose is to develop a sustainable, operational and commercially viable biofuel to replace currently used fossil-based fuels in the maritime sector. Developments are based on patented.
The aim of the project is to develop ensiling as a method for pretreatment of straw which allows use in biogas plants and ensures a higher biogas yield. Wet or moist straw is treated with ’ensiling