The project is testing a new type of IoT sensor technology. Today, the individual IoT sensor must be connected to power or contain batteries. New technology based on induction, makes it possible to
Investigation of the potential for optimized and reduced energy consumption via improved installation, monitoring and continuous adjustment of heat pumps in Danish homes, using IoT enabled machine
Plastic production is an energy intensive process with a high heating and cooling demand. The project will convert direct electricity use to an integrated solution, where the supplied energy is
In the project, a self-learning predictive control is developed and demonstrated that can de-liver the best possible indoor climate at minimal energy consumption. This is achieved with a digital twin
An intelligent adaptive control is being developed for heat pump-driven decentralized ventilation systems. This type of system is gaining ground on the basis of a sustainability criterion, as the
Disinfection with ultraviolet (UV) radiation is an effective but energy consuming way to control the corona pandemic. New UV-LED technology enables new applications of UV-light with potential energy
International lighting standards set important conditions when it comes to saving energy on
lighting. The project will incorporate greater attention to energy savings combined with lighting
quality in
The aim is to develop an electrified fast process for continuous heat treatment of solid foods using ohmic heating. The process is very energy efficient as the energy loss is only around 5%. In
The project shall uncover and realize potentials for energy savings on ventilation systems in public buildings using artificial intelligence on data concerning energy usage, indoor environment
In industry, despite previous efforts, there is still a large realizable potential for energy savings. With the project's developed IT software package, energy audit consultants and energy man-agers
This project focuses on synchronous re-luctance motors, and the frequency converters based on the WBG technology which both will increase the efficiency of the motor systems. The technologies are
Development and testing of a highly efficient and competitive heat pump for energy-efficient houses. The aim of the project is to develop a heat pump with a SCOP of 6.0 for floor heating (according to
Optimization of energy consumption in LED street lighting is more than LED chips with higher efficiency and intelligent management. There is a potential in optimizing and reducing the energy
ProfoundEnergyrenovation of aproperty where theowner and the tenantis not the samedecision maker,havedifficultconditionsandwiththe necessary investmentsoftenlies withthe ownerwhile
Housing listed as Building Class 2020 sets strict requirements for the ventilation system, as the building envelope becomes significantly tighter, and due to specific requirements for the thermal
The project is based on a new idea enabling the use of plastic in an expansion engine to utilise the expansion energy in refrigeration plants. 10-20% of the consumed energy in refrigeration can be
Freeze concentration is an energy efficient and careful alternative to evaporation which consume 6 % of the total energy consumption in the Danish industry. It is more efficient than the best
BeREAL is a software application – an ad-on to Be10. It can explain the differences between estimated energy use and operational energy use in a given building. Is the performance gap caused by
Principal development and functional analysis of a new concept called a semi-2-stage heat pump intended to be able to efficiently produce hot water at high temperatures at 110 °C and at a temperature