The project continued the activities under the Danish-Canadian project on more cost-efficient second-generation fuel cell systems for the UPS markets and materials handling. In the UPS segment, a 10
Dantherm Power has produced fuel cell systems as emergency power for a large national radio network for emergency preparedness communication. A total of 117 fuel cell systems have been produced on
The project funds Danish participation in two tasks under the IEA's Hydrogen Implementing Agreement, which in addition to the EU member states counts Japan, The USA, Canada and Australia. In Denmark
Optimising the production of SOFC cells and stacks opens up possibilities for testing and demonstrating products in three market segments, distributed electricity production, micro CHP and APU
In this project, tools were developed which offer the possibility of quickly designing layers of fuel cells for various markets and uses. In addition, two reformers were developed which can convert
Experience from the CHP units in phase 2 will be put to use in the final phase of mCHP to test an additional 100 units at the premises of the two project host teams in Sønderborg and Lolland
During phase 2 of mCHP, 13 beta type CHP units with LT-PEMFC, HT-PEMFC and SOFC-type fuel cells will be tested in Sønderborg and Lolland, respectively. The project industrial team will design and
The project develops components with a new composition of materials and more cost-effective production processes for PEM fuel cells to boost performance and reduce costs. The results are demonstrated
The project focuses on developing an SOFC stack technology which is efficient under realistic operating conditions in both small and large facilities. For this purpose, a test facility, for instance
Two DMFC generator modules 0.5 kW and 1.0 kW have been constructed for demonstration in UPS and battery charging applications. The overall goals defined in the Danish “DMFC Road Map” for 2008 has been
The demonstration plant includes the following elements: Container buildings for control and monitoring as well as housing of the process equipment. Two fully automated PEM-CHP fuel cell units of 2 kW
Under the Danish-Canadian project, Dantherm Power developed a fully integrated UPS system based on Canadian-based Ballard’s air-cooled LTPEM fuel cells. Eleven UPS units were installed to support
The goal of the present project was to develop new effective materials for hydrogen storage based on light elements. There are many known hydrides with higher weight percentages of hydrogen; however
The objective of the project has been to develop a compact fuel cell generator using methanol as fuel. The DMFC module will be tested as power generator for internal transport using a Mini Crosser
The purpose of the project is to further develop a Danish natural gas reformer system including optimisation of subsystems and the overall system consisting of a natural gas reformer and fuel cell CHP
The project studied the transportation in a small scale pilot grid at the research centre in Hørsholm, Denmark. The test program included steel pipes from the Danish gas transmission grid and polymer
The DK-SOFC b line is targeted towards: 1) decrease of the operation temperature without increasing the area specific resistance, 2) increase of the ro-bustness of the cell, 3) better understanding of
The goal of the project was to develop and demonstrate a 3 kWe DMFC generator aimed for Uninterruptible Power Supply. How-ever, a detailed concept evaluation based on the present Danish DMFC stack and
The goal of the project is to develop and test small (2 kW) reformers for converting natural gas into hydrogen for use in Proton Exchange Membrane (PEM) fuel cell cogen units for single-family houses
The project co-financed Danish participation in a European partnership under the 6th framework programme to test whether gas from thermal biomass gasification can be purified sufficiently to be used