The purpose of this project is to develop an end-to-end platform for acquiring real-time grid data and applying AI and Machine Learning algorithms with a systemwide perspective, that controls motor
Annex 89 aims to contribute to local, national and global efforts to accelerate and scale-up the transition of the building and real estate sector towards net-zero whole-life carbon (NetZ-WLC)
The purpose of the project is to enable a new highly scalable digital-based expert tool for condition-based maintenance on HVAC (Heating, Ventilation and AirCondition) and drive-line system on battery
The aim of this project is to design, test, optimize and prepare for an industrial scale demonstration of microwave cracking technology, converting biomass to biofuels and biochar for carbon storage
ECA Engineering will contribute with a pilot plant for the desalination part and with process simulations for the entire value chain in order to quantify the environmental benefits that can be
The project aims to develop the first Danish-designed ultra-efficient solar-powered lamps that can be used globally. These lamps will be DarkSky compliant and will be based on a Danish-developed
The aim of the project is to develop a new membrane-based nanobubble technology for aeration of wastewater treatment plants. We want to develop the first Danish-produced nanobubble technology, which
Asphalt is mainly composed of rocks and a binder. Currently a fossil fuel-based product, bitumen, is used as binder. The purpose of this project (LOOPER) is to further develop and test a new bio-based
The KurvedCores project are improving the current core material elements which are a main element in the construction of modern wind turbine blades. The improvement of core material and its fully
LoCoMoSa aims to develop a cost-effective molten salt thermal energy storage system to supply process heat at 120-450° C. The main expected results are a medium voltage electrical heater with reduced
The primary objective of the project is to address the pressing issue of methane emissions in the biogas sector by developing and implementing an innovative methane detection drone and measurement
The project purpose is to ensure that a large fraction of the potential for mass- and energyintegration can be exploited in industrial process plants. Today a significant fraction of the potentially
It is the purpose of the project to develop and energy efficient 'straightner' ventilation aggregate with an integrated 'chopper' heat exchanger for single-family houses, buildings of flats, offices
The aim of the project was to test the recently developed VFA online sensor under long-term operation at a large-scale biogas plant (Lintrup). The goal was to identify requirements of the system for
One objective of the project is to investigate the possibilities of developing controlled facade inlets at floor-height for natural ventilation by displacement ventilation, which does not result in
The objective of the project's Phase 1 is to evaluate the possibilities of system solutions with thermoactive constructions acting both as heating and cooling system under Danish conditions and with