Energy from biomass will be indispensable for a Danish energy system based on 100 % renewables. This project will provide solutions to use the available biomass most efficiently with a high
The aim of this project is to develop the technical foundation for a polygeneration plant based on LT-CFB gasification and zeolite tar-reforming. The system co-produce electricity, heat, bio-oil and
The project aim is to reduce the loss of methane from livestock buildings and pre-tanks while at the same time biogas plants increasing biogas production. The project aims both on quantifying the loss
The purpose of this project is to design and develop a new cheap online multi-pollutant sensor system that can be used to minimize the emissions of harmful particles and gases including tar, soot and
IEA Bioenergy Task works to monitor, review and exchange information on advance in research, development, demonstration an implementation of biomass combustion and confiring technologies and to
The objective of this project is to develop and demonstrate a new, more energy-efficient way of upgrading biogas for the combined production of biomethane and bioCO2. The aim is to improve the
Current state-of-the -art enrym screening assays such as AZCL subtrates are designed to analyse enzyme or culture performance on substrates based on purified purepolysaccharides. Because of that they
The objective of the project is to test and demonstrate the novel Steamboost technology at full scale. Furthermore, to obtain knowledge that will enable optimizations of the Steamboost technology.
To demonstrate that it is possible to achieve a degree of reuse on 70% by Automatic separation of household waste. It is a further goal to demonstrate that the content of problematic substances in the
The Purpose of this project is to develop a methodoly that can supply cheap biomass for production of 2 generation bioethanol and biogas. This will be done by conditioning animal bedding and
The project work will adress technological aspects of anaerobic digestion (AD). Based on the technical knowledge and expertise of its members the work of the Task 37 provides support to policy makers
The project report is the contribution from the industry to an action plan for development and demonstration of CHP technology for solid biomass. The report aims to serve as inspiration and basis for
The central goal of the project is to increase access to the international research results, technological breakthrough and work partners within biomass and energy purpose. The purpose of this is to
The purpose was to ensure a better and more rewarding communication between researchers and practicians, to illustrate which projects may become good business, to follow up the ongoing projects and to
The objective is to demonstrate on existing centralised biogas plants how biogas production can be increased and regulated by supplying solid fractions from manure and storable plant material
During this project an up-scaled, near commercial CatLiq plant has been designed. The plant is capable of converting low value feedstock such as pig manure into a high value bio oil, which can be used
There has been a further development regarding the manufacturing of bio ethanol from straw and other residues, were the production prices has been reduced to 2 kroners per liter bio ethanol.
The objective of the project was to improve the efficiency of anaerobic digestion of dairy cattle manure. The NiX® treatment improved by 48% the methane yield of the second step of the biogas process