The aim of the project is to identify, develop and describe existing and new concepts on the supply and installation side and demonstrate that renovations can live up to demands regarding energy
Two DMFC generator modules 0.5 kW and 1.0 kW have been constructed for demonstration in UPS and battery charging applications. The overall goals defined in the Danish “DMFC Road Map” for 2008 has been
The demonstration plant includes the following elements: Container buildings for control and monitoring as well as housing of the process equipment. Two fully automated PEM-CHP fuel cell units of 2 kW
The project investigated the conditions of applying district heating-driven adsorption heating pumps with underground storage for cooling and heating. The concept is most suitable for buildings with a
Air tightness must be brought into focus at an early stage in the planning process, and during the construction phase air tightness measurements should be performed, e.g. on facade sections or in
This project evaluated the performance of the ventilation systems in eight childcare centres, four of which have a natural ventilation system and four others a mechanical ventilation system. The
Under the Danish-Canadian project, Dantherm Power developed a fully integrated UPS system based on Canadian-based Ballard’s air-cooled LTPEM fuel cells. Eleven UPS units were installed to support
Together with the sector suppliers, the project developed a complete testing basis for assessment of the energy properties of ventilation devices on the basis of recognised Danish and foreign
Based on experience with ESCO projects in a number of local authority areas, NRGi Rådgivning developed and evaluated a phase-divided model for an ESCO partnership aiming to make it easier for the
In 1,452 households with remote-read meters in the Syd Energi supply area, customers received regular feedback on their electricity consumption via SMS or e-mail in a pilot project. The subsequent
The project idea is to use prefabricated thermo-active structures as concrete slabs with embedded plastic pipes (PEX). The active concrete slabs are used both as cooling and heating system, peak load
This project has included a PhD course at Aalborg University (AAU) and the Technical University of Denmark (DTU)/University of Southern Denamrk (SDU) and it has developed two types of converter which
A novel concept for preparation of sulfonate containing fluorinated block copolystyrenes have been developed based on initial ATRP of fluorinated styrene monomers. The strategy depends on well defined
The project aimed to improve stack technology for solid oxide fuel cell stacks (“SOFC”). The project developed and tested several improved stack components, including improved glass seals and
The project goal was to develop stack materials, components and stack technology, including industrially relevant production methods. Further, the project was to perform tests and demonstration of
The project studied use of information and communication technologies (ICT) in private homes through qualitative interviews, and the consequences for electricity consumption were analysed. Scenarios
The solar shading system development is based on analyses of daylight conditions at different types of solar-shading glass louvres under the IESve/Radiance programme. The chosen system has glass
SERC was carried out during the period from primo 2007 until end of 2012 I cooperation with leading Danish and International research institutes plus a wide spectrum of industrial partners. The
Magnetic refrigeration is an emerging technology using solid, non-volatile magnetic materials as the active components, and water or alcohol as the medium for heat transport. It holds great potential