This annex extends the cooperation between 5-7 IEA member countries on electric motor systems for use in industry, infrastructure and major constructions to promote efficiency enhancement by using
The purpose of the project was to demonstrate that by using new technologies, materials and operation parameters, the heat losses, the heat flow rate and the total costs of district heating can be
Danish Gas Technology Centre has been carrying out a feasibility project to clarify the possibilities of in-stalling gas expanders at M/R-stations (Measuring and Regulating) in the Distribution system
Under the IEA-ETDE (Energy Technology Data Exchange) agreement a common database is produced containing descriptions of journal articles, reports, books, conference papers etc. published in the member
The aim is to make information about Danish energy research and its results available to users in Denmark and abroad and, through international co-operation, to make international research and its
Development and demonstration of an electric hybrid vehicle, which is powered from a 276V Li-ion battery system. Battery Management System (BMS) and a 12kW HTPEM methanol-fuel cell. The fuel cell will
The aim of the project is to pmiicipate in lEA Hydrogen Implementing Agreement (HIA), in order to stimulate hydrogen R&D activities in Denmark and to co-ordinate Danish and international scientific
The energy saving potential by energy renovating the existing building stock in Denmark is very large but the implementation of energy savings is only carried out to a small extend. In order to
This project has developed and tested a new concept for heat exchanger efficiency monitoring that on-line calculates and visualises the energy costs resulting from fouling. This makes it possible to
The project continued the Danish participation in ETSAP (Energy Technology Systems Analysis Programme), Annex X under the new Annex XI 'JOint STudies for New And Mitigated Energy Systems (JOSTNAMES)
The project is an international IEA – cooperation project, which will contribute to the goal of making Denmark one of the leading countries regarding development of buildings with a very low use of
The aim of the project is to establish a fundament for the functioning of the equity alliance EnergyBUILD. This fundament will be established through: 1) mapping of potentials for energy savings and
The objective of this project is to develop, test and demonstrate a cost-efficient concept for energy efficient retrofitting, reducing a dwelling's energy frame value to low-energy class 1 or better.
Via light measurements, indoor environment PV cell effect measurements, development of control electronics in actuaries and PV cells and, based on a preliminary market analysis, the preliminary
Through measurements and simulations, the project analysed the potential energy savings achievable by allowing the room temperature of a building to fluctuate by plus/minus 2.5 degrees C over the
District heating creates the possibility for flexible energy usage. The intention of the energy savings effort is true fuel-saving measurements and consequently obtaining reduced CO2 emissions. One
The project is aimed at funding the Danish participation in the project ''Analysis of potentials and costs of storage of CO2 in the Utsira aquifer in the North Sea - StorageUtsira'' within FENCO-ERA