In the BIPV Quality Cities project the total amount of PV systems with special focus on BIPV Quality, Solar Watch online monitoring and a combined focus electricity savings will amount to 3.850 kWp.
The main purpose of the planned Phase III (PVIB-III) is establishment of 1,5 – 2 MW of additional capacity primarily in terms of a large utility scale PV power plant of at least 1,5 MW. Thus very
Weptos A/S receives the award "Årets bedste ForskEL projekt 2012" for best energy research project awarded by Energinet.DK. The award was given to Weptos A/S for an excellent and professionally
The purpose of this project is to demonstrate and optimize the design of a 5 kW grid connected wave energy LOPF (Lever Operated Pivoting Float) buoy, through a design study and subsequent test in the
Pre-study to design and demonstrate, in small scale, cost effective solutions for 3 commonly identified challenges in the wave power industry, which typically involves floating devices. High efficient
This project focuses on the integration of photovoltaics (PVs) with thermoelectric generators (TEGs) and microchannel heat exchangers (µHX) in two parallel phases: low-thickness solar power systems
The objective for Partnership for Wavepower Roadmaps are to consolidate and combine the Danish Wave Developers common efforts and produce plans to achieve common goals for Anchor systems, Power
The aim is to develop a solar-powered comfort cooling system, where electricity produced by solar cells via a heat pump is converted to air conditioning in the existing ventilation system, via
The proposed EUDP project is realized in cooperation with the housing association, 3B, which will be involved in a large roof renovation project in the Måløv Park housing estate.
The purpose of this project is to validate the technical and commercial potential in a new method to manufacture feedstock for silicon solar cells. The method is expected to generate the same product
The future role of solar thermal in urban environments and in smart renewable energy systems is analysed in this project. Based on economic analysis, strategies and technical solutions as well as
The purpose of this Combined Solar Thermal Demonstration is to commercialize the CSP system, and verify the respective efficiencies of CSP and Flatpanel technology at a variety of temperatures, the
The project aims to develop a PVT module that combines insulation, solar cell and solar panel in integrated building components intended for the renovation of apartment buildings. The building
The aim of the project is to develop very large self-sustainable PV/PVT modules with associated flashings which can replace existing roofing on larger buildings such as sheds, warehouses, etc
”The New Roof” is a holistic new approach to obtain the multifunctional and energy harvesting roof for renovation and new build. It is developed in an integrated design process aiming at a market
The purpose of the project is to build a pilot installation using a new generation of ultra cost-effective solar modules – SunTubes. The pilot plant will validate the technology towards later
There is still missing affordable building integrated photovoltaic solutions that architectural adapts the traditionally Danish building´s appearance. The goal is to develop ventilated roof cassettes
The project concerns the development and demonstration of intelligent, cost-effective façade units with built-in solar cells and solar screens. Everything is made pre-fab and will be built modular and
The purpose is to develop a low-cost, high performance BIPV solution that can be tailored to unique site requirements, with focus on multi-story buildings in cities. A supplementing business model
Coordination of - and participation in: - Extended period of IEA-SHC Task 43 "Solar Rating & Certification". - Extended period of IEA-SHC Task 45 "Large Solar Heating and Cooling Systems with Heat