The aim of the UnitSun project is to develop the worlds most advanced prefabricated PV integrated façade system utilizing all the benefits of the prefabrication approach to the construction market for
Project FSSE aims to develop a concentrated solar capture (CSP) system with storage and a high temperature Organic Rankine Cycle Unit (ORC) that can be utilized on demand to produce carbon neutral
New PV module and inverter technology replace old well-known solutions potentially introducing new failure modes. To mitigate such risk factors and support continued deployment of utility scale PV
In the BIPV Quality Cities project the total amount of PV systems with special focus on BIPV Quality, Solar Watch online monitoring and a combined focus electricity savings will amount to 3.850 kWp.
The main purpose of the planned Phase III (PVIB-III) is establishment of 1,5 – 2 MW of additional capacity primarily in terms of a large utility scale PV power plant of at least 1,5 MW. Thus very
This project focuses on the integration of photovoltaics (PVs) with thermoelectric generators (TEGs) and microchannel heat exchangers (µHX) in two parallel phases: low-thickness solar power systems
The aim is to develop a solar-powered comfort cooling system, where electricity produced by solar cells via a heat pump is converted to air conditioning in the existing ventilation system, via
The proposed EUDP project is realized in cooperation with the housing association, 3B, which will be involved in a large roof renovation project in the Måløv Park housing estate.
The purpose of this project is to validate the technical and commercial potential in a new method to manufacture feedstock for silicon solar cells. The method is expected to generate the same product
The future role of solar thermal in urban environments and in smart renewable energy systems is analysed in this project. Based on economic analysis, strategies and technical solutions as well as
The purpose of this Combined Solar Thermal Demonstration is to commercialize the CSP system, and verify the respective efficiencies of CSP and Flatpanel technology at a variety of temperatures, the
The project aims to develop a PVT module that combines insulation, solar cell and solar panel in integrated building components intended for the renovation of apartment buildings. The building
The aim of the project is to develop very large self-sustainable PV/PVT modules with associated flashings which can replace existing roofing on larger buildings such as sheds, warehouses, etc
”The New Roof” is a holistic new approach to obtain the multifunctional and energy harvesting roof for renovation and new build. It is developed in an integrated design process aiming at a market
The purpose of the project is to build a pilot installation using a new generation of ultra cost-effective solar modules – SunTubes. The pilot plant will validate the technology towards later
There is still missing affordable building integrated photovoltaic solutions that architectural adapts the traditionally Danish building´s appearance. The goal is to develop ventilated roof cassettes
The project concerns the development and demonstration of intelligent, cost-effective façade units with built-in solar cells and solar screens. Everything is made pre-fab and will be built modular and
The purpose is to develop a low-cost, high performance BIPV solution that can be tailored to unique site requirements, with focus on multi-story buildings in cities. A supplementing business model