The project is testing a new type of IoT sensor technology. Today, the individual IoT sensor must be connected to power or contain batteries. New technology based on induction, makes it possible to
Investigation of the potential for optimized and reduced energy consumption via improved installation, monitoring and continuous adjustment of heat pumps in Danish homes, using IoT enabled machine
Plastic production is an energy intensive process with a high heating and cooling demand. The project will convert direct electricity use to an integrated solution, where the supplied energy is
In the project, a self-learning predictive control is developed and demonstrated that can de-liver the best possible indoor climate at minimal energy consumption. This is achieved with a digital twin
An intelligent adaptive control is being developed for heat pump-driven decentralized ventilation systems. This type of system is gaining ground on the basis of a sustainability criterion, as the
Disinfection with ultraviolet (UV) radiation is an effective but energy consuming way to control the corona pandemic. New UV-LED technology enables new applications of UV-light with potential energy
International lighting standards set important conditions when it comes to saving energy on
lighting. The project will incorporate greater attention to energy savings combined with lighting
quality in
The aim is to develop an electrified fast process for continuous heat treatment of solid foods using ohmic heating. The process is very energy efficient as the energy loss is only around 5%. In
The project shall uncover and realize potentials for energy savings on ventilation systems in public buildings using artificial intelligence on data concerning energy usage, indoor environment
In industry, despite previous efforts, there is still a large realizable potential for energy savings. With the project's developed IT software package, energy audit consultants and energy man-agers
This project focuses on synchronous re-luctance motors, and the frequency converters based on the WBG technology which both will increase the efficiency of the motor systems. The technologies are
During the project there will be developed models, that combines energy efficient perfomance of the indoor climate for three buildings and fitted the electricity spot market's variable prices for the
The project will highlight the causes for that the actual energy consumption in modern office buildings is much larger than expected during the project engineering (planning) and therefor the building
The project will contribute with a more correct calculation of the actual energy consumption for heat pumps and cooling systems in the simulation programme Be10 by designing and implement better
In a PhD studyevaluatedthe use ofthe newly developeddynamicfaçadesystemEnergy Framesin the context ofan EU-fundeddemonstrationproject carried outinsix buildingsin sixnorthern European
Micro Ventilation is very suitable for successive renovation and can operate independent of other indoor climate systems. In order to conserve energy, the interaction between the different climate
This project exhibits at the LED conference the 20th of March 2013 hold in IDA-Huset in Copenhagen. The focus for the conference is light, health and health service. The conference is organised by