Energy from biomass will be indispensable for a Danish energy system based on 100 % renewables. This project will provide solutions to use the available biomass most efficiently with a high
The aim of this project is to develop the technical foundation for a polygeneration plant based on LT-CFB gasification and zeolite tar-reforming. The system co-produce electricity, heat, bio-oil and
The project aim is to reduce the loss of methane from livestock buildings and pre-tanks while at the same time biogas plants increasing biogas production. The project aims both on quantifying the loss
The purpose of this project is to design and develop a new cheap online multi-pollutant sensor system that can be used to minimize the emissions of harmful particles and gases including tar, soot and
IEA Bioenergy Task works to monitor, review and exchange information on advance in research, development, demonstration an implementation of biomass combustion and confiring technologies and to
The objective of this project is to develop and demonstrate a new, more energy-efficient way of upgrading biogas for the combined production of biomethane and bioCO2. The aim is to improve the
Current state-of-the -art enrym screening assays such as AZCL subtrates are designed to analyse enzyme or culture performance on substrates based on purified purepolysaccharides. Because of that they
The objective of the project is to test and demonstrate the novel Steamboost technology at full scale. Furthermore, to obtain knowledge that will enable optimizations of the Steamboost technology.
To demonstrate that it is possible to achieve a degree of reuse on 70% by Automatic separation of household waste. It is a further goal to demonstrate that the content of problematic substances in the
The Purpose of this project is to develop a methodoly that can supply cheap biomass for production of 2 generation bioethanol and biogas. This will be done by conditioning animal bedding and
The project work will adress technological aspects of anaerobic digestion (AD). Based on the technical knowledge and expertise of its members the work of the Task 37 provides support to policy makers
The project involves the final process design of a full-scale plant for continuous prodiction of second-generation bioethanol based on results from the IBUS pilot plant, where straw is the basic
The project aims to enhance current knowledge of how temperature and pressure during the production process and the water content of biomass affect pellet quality, and of the mechanical properties of
Through contacts to key players in the biofuels market, various means and policies are considered to identify the most apporpriate package solutions. The results will be used by the European
IEA task 42 identifies existing biorefineries and process potential, prepares common definitions and standards for classifying and assessing technical, financial and environmental advantages and
Methods are devised for online control of biofuel pellet quality using, for instance, mechanical durability, fine particles, pellet density and length and particle size as parameters. The new methods
The project enables Denmark to resume its activities in the IEA implementing agreement on hybrid and electric vehicle (IA-HEV), dealing with, for instance, electric cars with batteries and fuel cells
These two projects continue the publication of the eight-page news magazine Bioenergy Research with six issues a year. The magazine goes over new research results and features debate-triggering and
One of the current topics of the IEA’s cooperation on research in fuel wood chips is forecasts of fuel resources, technical production, wood fuel transport, valuation, long-term storage of decomposed