The aim of the project is to reduce the average energy price for utility scale photovoltaic systems by increasing the harvested solar energy by using bifacial solar modules, reflectors, trackers and
The objective of the project is to ensure that Danish research institutions and companies active in the development, installation and operation of PV systems, are informed on the technical and
The overall purpose of the project is to increase the market for plastic solar cells by ensuring entrance of larger panels and systems through scalable electronics.
To develop more effective, safe and durable lenses for concentrated solar power. Efficiency and durability will be improved by using better materials than the current thermoplastics, and safety and to
In the BIPV Quality Cities project the total amount of PV systems with special focus on BIPV Quality, Solar Watch online monitoring and a combined focus electricity savings will amount to 3.850 kWp.
The main purpose of the planned Phase III (PVIB-III) is establishment of 1,5 – 2 MW of additional capacity primarily in terms of a large utility scale PV power plant of at least 1,5 MW. Thus very
This project focuses on the integration of photovoltaics (PVs) with thermoelectric generators (TEGs) and microchannel heat exchangers (µHX) in two parallel phases: low-thickness solar power systems
The aim is to develop a solar-powered comfort cooling system, where electricity produced by solar cells via a heat pump is converted to air conditioning in the existing ventilation system, via
The proposed EUDP project is realized in cooperation with the housing association, 3B, which will be involved in a large roof renovation project in the Måløv Park housing estate.
The purpose of this project is to validate the technical and commercial potential in a new method to manufacture feedstock for silicon solar cells. The method is expected to generate the same product
The future role of solar thermal in urban environments and in smart renewable energy systems is analysed in this project. Based on economic analysis, strategies and technical solutions as well as
The purpose of this Combined Solar Thermal Demonstration is to commercialize the CSP system, and verify the respective efficiencies of CSP and Flatpanel technology at a variety of temperatures, the
The project aims to develop a PVT module that combines insulation, solar cell and solar panel in integrated building components intended for the renovation of apartment buildings. The building
The aim of the project is to develop very large self-sustainable PV/PVT modules with associated flashings which can replace existing roofing on larger buildings such as sheds, warehouses, etc
”The New Roof” is a holistic new approach to obtain the multifunctional and energy harvesting roof for renovation and new build. It is developed in an integrated design process aiming at a market
The purpose of the project is to build a pilot installation using a new generation of ultra cost-effective solar modules – SunTubes. The pilot plant will validate the technology towards later
There is still missing affordable building integrated photovoltaic solutions that architectural adapts the traditionally Danish building´s appearance. The goal is to develop ventilated roof cassettes
The project concerns the development and demonstration of intelligent, cost-effective façade units with built-in solar cells and solar screens. Everything is made pre-fab and will be built modular and
The purpose is to develop a low-cost, high performance BIPV solution that can be tailored to unique site requirements, with focus on multi-story buildings in cities. A supplementing business model
Coordination of - and participation in: - Extended period of IEA-SHC Task 43 "Solar Rating & Certification". - Extended period of IEA-SHC Task 45 "Large Solar Heating and Cooling Systems with Heat