The object of this project was to show the existence of high-frequency fluctuations. The measurement of these fluctuations and the subsequent frequency analyses revealed that these frequencies may be
In this project a number of industrial and agricultural waste products have been characterised and evaluated in terms of alkali-getter performance. The intended use is for biomass-fired power stations
The object was to improve existing PARK models for calculating array losses for wind farms with focus on large offshore wind farms. The project shows that intelligent use of the model parameters
The compiled measuring results and modelling tests produced a scientifically founded basis for providing recommendations for future offshore wind farms in respect of mutual distances between farms and
Københavns Universitet
ForskEL
2004
2011
Recycling of nutrients in wood ash is currently made difficult by the Danish bio ash notice (2004). The aims of this project is to develop and compile a well-documented concept for recirculation of
The project establishes a new model of the Danish electricity system in the form of two buses (east and west Denmark), to which new models of load and production units are connected in the form of
The project aimed at developing additives that will minimise corrosion during biomass combustion. To determine the impact of additives on SCR catalysts, the project tested potential additives in the
Wood is a strongly anisotropic material and likewise the char produced by pyrolysis of wood is characterized by a strong anisotropy. This anisotropic behaviour allows relatively easy transport of gas
The in the EFP 2002 project were related to the development of a 3G cell with a metal suport of ferritic stainless steel and with stability towards redox and thermal cycling.
The objective of the project was to participate in the IEA annex 'Dynamic models of wind farms for power system studies'. The objective of the IEA annex is to establish an international forum for
The 'Clear Views on Clean Fuels' (VIEWLS) project aims to increase our insight into: 1) The economic and environment-technical performances of the various transport biohels, both existing biohels and
First a numerical model has been establishment that can represent the electricity system with a spot market as found on the Nordic countries. This includes a model structure and associated
In 2003 the Executive Committee (ExCo) adopted a new strategy. The mission is to provide governments, industry and the research community in the member countries with access to the widest range of
The aim is to: verify the final choice of solvent for 'Guideline for Sampling and Analysis of Tar and Particles in Biomass Producer Gas' and to develop an unambiguous method for tar evaporation with
The object was to contribute to an international development of methods for a joint evaluation and optimization of the thermal and solar properties of windows. The project was a basis for Danish
As a continuation of preliminary experiments on super critical water cleaning a process development unit (PDU) for a capacity of 50-60 kg/h will be designed and built.
The main objective of Annex XVII is to provide wind energy planners and designers, as well as the international wind engineering community in general, with easy access to quality controlled measured
The activities in the project were: Cell test under extreme conditions, development and analysis of contacting, stability towards redox and thermal cycling, improvements of methods, and development