The project develops a design complex for a district heating system, which, by using new technologies, materials and operating modes, will be able to lower total costs by so much that tomorrow’s low
The durability and performance of fuel cells have a major impact on the most important challenges facing fuel cell commerciallization including cost, mass production, system integration, functionality
The project objective was to perfect Danish technology in high temperature PEM fuel cells. It lasted two years and addressed the fuel cell components membranes, cells and cell stacks. The primary
The project is a core project of the Danish SOFC programme. The goal of the project was to continue developing SOFC cell and stack technology while reducing production costs, the aim being to meet the
The Use of the TEG technology with a Solid Oxid (SOFC) system. The TEG (Thermoelectric Generator) consists of a number of TE elements which are semiconductor elements on a string literally wrapped
The aim of the project is to identify, develop and describe existing and new concepts on the supply and installation side and demonstrate that renovations can live up to demands regarding energy
Two DMFC generator modules 0.5 kW and 1.0 kW have been constructed for demonstration in UPS and battery charging applications. The overall goals defined in the Danish “DMFC Road Map” for 2008 has been
The demonstration plant includes the following elements: Container buildings for control and monitoring as well as housing of the process equipment. Two fully automated PEM-CHP fuel cell units of 2 kW
The project investigated the conditions of applying district heating-driven adsorption heating pumps with underground storage for cooling and heating. The concept is most suitable for buildings with a
Air tightness must be brought into focus at an early stage in the planning process, and during the construction phase air tightness measurements should be performed, e.g. on facade sections or in
This project evaluated the performance of the ventilation systems in eight childcare centres, four of which have a natural ventilation system and four others a mechanical ventilation system. The
Under the Danish-Canadian project, Dantherm Power developed a fully integrated UPS system based on Canadian-based Ballard’s air-cooled LTPEM fuel cells. Eleven UPS units were installed to support
A novel concept for preparation of sulfonate containing fluorinated block copolystyrenes have been developed based on initial ATRP of fluorinated styrene monomers. The strategy depends on well defined
The project aimed to improve stack technology for solid oxide fuel cell stacks (“SOFC”). The project developed and tested several improved stack components, including improved glass seals and
The project goal was to develop stack materials, components and stack technology, including industrially relevant production methods. Further, the project was to perform tests and demonstration of
The main activities of the project were developing improved SOFC electrodes, cells and interconnects through careful characterizations in interaction with new fabrication methods. Major break-throughs
This project is the first phase of a project consisting of three phases, which aims at demonstrating micro CHP based on Danish fuel cells. The project will test three different fuel cell technologies
It is a common opinion that water electrolysis is an available and mature technology, which is not wide spread because it is too expensive compared to steam reforming of hydro carbons. As a