A methodology for detailed mapping of smart grid potential of buildings facing an energy retrofit is developed. READY.DK is a research effort into a larger EU demo-project, and aims to contribute to
Force Technology
EUDP
2015
2017
The vision of PCMS - Task 2 is an online Predictive Corrosion Monitoring System (PCMS) that through measurements of few, significant flue gas components can predict and hence optimise the corrosion
MicrobStopNH3 project will use bioaugmentation of ammonia tolerant methanogenic consortia to enhance methane production up to 35 pct in a large-scale biogas reactor suffering from ammonia toxicity
The objective of the project is to achieve final proof of concept of the Wavepiston technology. A scaled model has earlier been validated at University of Aalborg and a pilot project has been
The Power2Hydrogen project seeks to promote a new green energy market by demonstrating feasible load shifting and the possibility of balancing the electricity grid via dynamic operation of a PEM water
The project aims at supporting an efficient and fast conversion of pulverized coal-fired power plants from operation on coal to biomass pellets. The focus is to investigate key issues that can ensure
The project will evaluate the influence of materials microstructure on biomass corrosion in CHP plants. Models of biomass corrosion related to fuel, material and environment will be developed. Results
Aiming at promotion of polymer fuel cell applications in association with renewable sources e.g. windmill, the electro-catalyst is the key to higher performance, effective cost and prolonged
RePlan project is a frontrunner for the integration of large share of renewable energy in the Danish power system. The novelty of RePlan consists in the investigation and verification of the ancillary
The vision of this project is to develop and document a wall solution which suits the building regulation of year 2020 and at the same time presents an aesthetic attractive wall with long lifetime
The goal is to design a new generation of refrigerated counters for professional kitchens. The design must be flexible and fulfil the need of the chef. The coming design will fulfil the criteria for
For the buildings sector globally, reducing energy consumption and providing comfortable indoor environments are important tasks. The overall aims of the project are: elaboration of a scientifically
The project develop a roof window for the North- Central European market, primarily for existing buildings.
The window shall bring daylight and fresh air into the building without heat loss
The window
The project will develop a smart LED lighting solution, where the LEDs are built directly into e.g. walls or ceilings. The LEDs will be controlled individually or in groups by a central control unit
The project ’Geothermal pilot hole’ will address CAPEX concerns by demonstrating how processes and procedures from oil&gas has merit, but technology must be developed to fit, and not be adopted from
Geothermal water in Denmark contains large amounts of salt, which via salinity power can be used to produce CO2 neutral electricity. The project aims at demonstrating this so that compact salinity pow
The objective of the project is to demonstrate an up to 50% increase in biogas production by use of the AD Booster system at commercial scale using various types of organic fibres, such as straw and o
The goal of the project is to develop and demonstrate a drone based system to inspect energy systems and distribution. A lightweight video and IR cameras system shall be developed, analyzed, and
AMHVAC is a small, energy efficient air handling unit- for e.g. a classroom or an office -that performs all heating and cooling with an air-air heat pump. It is “decentralized” i.e. without ducting
The purpose of the development and demonstration project is to develop, demonstrate and promote an energy efficient concept With a domestic hot water (DHW) solution with a storage tank for apartment