The consortium will improve the energy collectors and energy efficiency on the most weight and cost-efficient wave energy system currently in development. The EUDP project targets the primary CAPEX
The aim of this project is to design, test, optimize and prepare for an industrial scale demonstration of microwave cracking technology, converting biomass to biofuels and biochar for carbon storage
The primary objective of the project is to address the pressing issue of methane emissions in the biogas sector by developing and implementing an innovative methane detection drone and measurement
The overall objective of this project is to develop a carbon-neutral technology for converting plastic waste to methanol. There is a large carbon dioxide emission reduction potential as both
The purpose of this project is to implement the next phase in the Exowave strategy, which is to be able to establish a 250 MW wave power plant together with an offshore wind farm before 2030 in Danish
The purpose of this project is to make Crestwing completely ready for its first commercially viable device. With the final demonstration of Crestwing’s 30-meter, 65 tons prototype “Tordenskiold”, the
The project will deliver the knowledge base and precise assumptions needed for Crossbridge and in the future other refineries to make investment decisions to build and operate commercial scale plants
The project purpose is to ensure a successful development of Hirtshals Port through intelligent use of data to control the overall energy system. Data will be measured and stored in a local data hub
The main purpose of this project is to demonstrate a large-scale pyrolysis process for production of high-quality biochar and energy from common agricultural waste products. The operation of the
The purpose of the project is thus to develop a full-scale flash pyrolysis plant with a capacity of 15 tons of biomass per day. The plant will be developed in continuation of the reactor patent we
The SkyClean Scale-Up project makes it realistic to achieve a pyrolysis-based reduction of greenhouse gas emissions from the Danish agricultural sector of at least 2 million tonnes of CO2e yearly in
PURfection will pursue total recyclability of the high-performance and difficult to replace plastic material polyurethane (PUR). Its excellent performance and extensive range of applications
Increased digitalisation is key to combatting climate change, with potentially 10-60% reductions of energy consumption and CO2 emissions. The challenge to harvesting these benefits is the
DanQ is the first large-scale Danish effort aimed at building an integrated quantum computing eco-system pursuing commercially and societally relevant applications within the Danish green
The global shift of energy paradigm to carbon-free technologies has significantly increased the penetration of grid-tied power electronics. Power electronic systems are a key enabler in the
A new epoch of hyperspectral imaging (HSI) technology is evolving as the technology has gained interest in the recent decade, mainly due to enhanced production methods, improved computing
READY will pursue textile-to-textile recycling, spearheaded by the Danish textile companies Mascot, Bestseller, and Kvadrat. The continuously growing textile production has approximately
We urgently need solutions to reduce our resource consumption and waste created. We all see in our everyday cooking how plastic waste piles up with 31 kg of plastic waste produced per EU
The aim is to develop an integrated technology for organic waste treatment resulting in significantly lower carbon footprint approximately 1-2 kg eq. of CO2 for proteinous feed production by
Hyperspectral imaging using broadband light sources is very important to textiles and meat. Textile recycling is a growing industry due to its immense pollution of microplastics and chemicals