The aim of the project is to demonstrate a full scale pit heat storage (60.000 m3 ) in combination with a large solar collector field (35.000 m2) and heat pumps (3 MW).
The main goal was to improve solar architecture as well as better qualified architects and better communication and interaction between architects, engineers, manufacturers and clients.
MicroShades are window glass panes with built-in shading based on geometric screening of solar rays, shading direct solar irradiation from the outside while having a clear outlook from the inside. The
Energy technology research development and demonstration of 2nd generation alkaline electrolysis by: Improved electrode efficiency. Higher operation temperature. Higher operation pressure. Improved
The use of air-conditioning in Denmark is strongly increasing. Most new office buildings are equipped with airconditioning plants. Furthermore the new building regulations means an increasing need for
The project wishes to develop and test season heat storage for solar heating plant based on a salt hydrate. A line of experimental and theoretical studies shall help define how the heat storage is
Fuel cell based backup power and UPS was developed with hydrogen from natural gas, LPG or methanol. Potential customers have shown considerable interest in alternative fuels for fuel cells
LINK2009 is a public private partnership. The objective is to develop state-of-art fuel cell systems for hydrogen vehicles and a 350bar hydrogen refuelling station. In Phase 1 is supported by the
The main goal of this project was to assist in facilitating a successful deployment of micro combined heat and power fuel cells to the benefit of society and the environment taking into consideration
The overall purpose of the HyLift-0 project is to develop a first generation HT-PEM / Li-Ion fuel cell system for a class 3 forklift and benchmark this with an existing LT-PEM fuel cell system
The project worked with three key objectives in the roadmap on Danish fuel cell strategy. Optimisation of fuel cell production, an area in which the project succeeded in saving electricity and raw
The project aims at developing and demonstrating a new fluent and isolated selling construction for the 10.000m3 water heating storage in Marstal Fjernvarme. The solution is expected to be implemented
The aim of the project is to measure the collector efficiency and investigate the state of a few old solar collectors for solar heating plants. The collectors, which will be investigated, have been in
The aim of the project is to obtain significant fuel cell performance and cost reductions through component and manufacturing technology development. The project has concentrated on the two key
This Solar Thermal Action Plan is a follow up on the Solar Thermal Strategy, which showed large potentials for utilization of solar thermal in Denmark. In the Action Plan it is shown how the ambitious
In the Backup Power segment, the fuel cell units have been developed, certified and delivered. A total of 32 fuel cell backup power systems have been delivered to EnergiMidt. In the material handling
This partnership has developed a model for innovation networks, as well as a website, and a market study was prepared. This study was reproted in four market reports on four product areas and seven
The goal of the project is the continued development and validation of a PowerShade window and facade element, which is a strong solar shading and a semi-transparent solar cell. The core technology is
The project aims over a three year period to install approximately 1 MWp of grid connected PV systems on a selection of the municipal buildings targeting coverage of all major building applications, e