The purpose of the projekct is to duce cost of energy in the design, production, transport, installation and maintenance of monopile foundations for large offshore wind turbines. The primary goal is
The purpose is to clarify advantages and disadvantages of a large biogas grid supplying larger customers. The biogas grid will be connected to the natural gas grid. Some involved subjects are
The purpose of the project is to improve and validate newly developed models for simulation and prediction of wind power fluctuations, by integrating the tools with meteorological tools for wind
The main purpose of the project is the development of SO3 in-situ IR measurement technique which will be suitable for industrial applications on SCR units of power plants and proved on an industrial
The aim of project is to investigate the combination of biomass gasification with SOFC in an efficient decentralized and flexible energy system for small scale combined heat and power production. The
The objective of this project is on basis of simple measurements on 6 turbine towers in the Rødsand 2 wind farm to identify, model and verify the basic mechanisms driving the increased loading
The main aim of the project is to investigate and further document the current need for research application on improved electrical efficiency in CHP plants fired with waste on a grate. (Energy 10)
The purpose of the present project is to synthesize, characterize and test new catalysts for Selective Catalytic Reduction of NOx using hydrocarbons instead of ammonia as reductant, including their
New command and control mechanisms are to prevent wind power from destabilising the power grid. This is an important prerequisite for meeting the goals of 42 pct. wind share for 2020.
The proposed project will investigate a new wind power system, includiing a direct drive low speed Switched Reluctance Generator (DL-SRG) and a DC network connecting the DL-SRGs. It is expected that
By collaboration between Danish and Chinese experts in wind turbine aerodynamics, optimisation and control, and atmospheric turbulence, aim is to develop an integrated apporach, which provides
The goal of this project is to create a scientific basis for the development of advanced, strong materials for wind blades by optimising their structures at microlevel. This goal is achieved by
We propose to further the availability of high quality bio-oils for transportation and energy use. The focus is on locally available biomass resources, in Denmark and China, and the selection of
Wind turbine components such as gears and naves are exposed to large and very dynamic loads. The typical modes of production have difficulties handling this. REWIND focuses on materials, processes
A major technical development is required if Danish heat and power plants are to replace fossil fuels with biomass in the future. GREEN will facilitate this development by optimizing the agricultural
Accumulation of excess hydrogen in the production of biogas from manure is a problem, because it slows down the process. HYCON investigates the influence and distribution of hydrogen in the conversion
Waste as a flexible energy source and wast recycling are important elements of a greener society. TOPWASTE will develop new and advance existing models for planning the treatment of waste, in part
The project aims to optimise existing solutions to the yaw mechanism for wind turbines, improve properties with regard to noise, fatigue and peak load, wear and service.
AMMONGAS A/S
ForskEL
2010
2011
The purpose of the project is to devellop, demonstrate and verify a cheap type of water/amin scrubbing method for removal of CO2. Leading to a gas so comperatible to natural gas, in respect to