The purpose of this project is to develop an end-to-end platform for acquiring real-time grid data and applying AI and Machine Learning algorithms with a systemwide perspective, that controls motor
Annex 89 aims to contribute to local, national and global efforts to accelerate and scale-up the transition of the building and real estate sector towards net-zero whole-life carbon (NetZ-WLC)
The purpose of the project is to enable a new highly scalable digital-based expert tool for condition-based maintenance on HVAC (Heating, Ventilation and AirCondition) and drive-line system on battery
The aim of this project is to design, test, optimize and prepare for an industrial scale demonstration of microwave cracking technology, converting biomass to biofuels and biochar for carbon storage
ECA Engineering will contribute with a pilot plant for the desalination part and with process simulations for the entire value chain in order to quantify the environmental benefits that can be
The project aims to develop the first Danish-designed ultra-efficient solar-powered lamps that can be used globally. These lamps will be DarkSky compliant and will be based on a Danish-developed
The aim of the project is to develop a new membrane-based nanobubble technology for aeration of wastewater treatment plants. We want to develop the first Danish-produced nanobubble technology, which
Asphalt is mainly composed of rocks and a binder. Currently a fossil fuel-based product, bitumen, is used as binder. The purpose of this project (LOOPER) is to further develop and test a new bio-based
The KurvedCores project are improving the current core material elements which are a main element in the construction of modern wind turbine blades. The improvement of core material and its fully
LoCoMoSa aims to develop a cost-effective molten salt thermal energy storage system to supply process heat at 120-450° C. The main expected results are a medium voltage electrical heater with reduced
The primary objective of the project is to address the pressing issue of methane emissions in the biogas sector by developing and implementing an innovative methane detection drone and measurement
The objective of the project is to contribute to the development and implementation of industrial heat pumps of the future. That will take place by participating in a newly established annex under the
Admixing of alcohols in motor fuels can result in CO2 reductions and even better combustion, but also holds a number of technical challenges. The International Energy Agency wished to create a global
The project will compare next generation biodiesel to current biodiesel. HVO Biodiesel has superior properties compared to the traditional FAME type biodiesel produced by DAKA and Emmelev.
The project focuses on improving the gas yield from animal manure, straw and degassed fiber residues by pre-treatment. The objective is to demonstrate process stability during continuous pilot plant
RETROMAX aims to develop and demonstrate a slurry treatment technology that economically increases the amount of animal slurry/manure based feedstock to biogas plants resulting in a higher biogas
The project aims at testing the Pyroneer technology as a promising platform for improved utilization of a variety of low-value and difficult fuels from different sectors in society in order to produce
Topsoe's new methanol reactor (CONRAD) produces syngas and methanol from biomass. The project will demonstrate that CONRAD works as expected at industrial conditions and investigate how this novel