Energy from biomass will be indispensable for a Danish energy system based on 100 % renewables. This project will provide solutions to use the available biomass most efficiently with a high
The aim of this project is to develop the technical foundation for a polygeneration plant based on LT-CFB gasification and zeolite tar-reforming. The system co-produce electricity, heat, bio-oil and
The project aim is to reduce the loss of methane from livestock buildings and pre-tanks while at the same time biogas plants increasing biogas production. The project aims both on quantifying the loss
The purpose of this project is to design and develop a new cheap online multi-pollutant sensor system that can be used to minimize the emissions of harmful particles and gases including tar, soot and
IEA Bioenergy Task works to monitor, review and exchange information on advance in research, development, demonstration an implementation of biomass combustion and confiring technologies and to
The objective of this project is to develop and demonstrate a new, more energy-efficient way of upgrading biogas for the combined production of biomethane and bioCO2. The aim is to improve the
Current state-of-the -art enrym screening assays such as AZCL subtrates are designed to analyse enzyme or culture performance on substrates based on purified purepolysaccharides. Because of that they
The objective of the project is to test and demonstrate the novel Steamboost technology at full scale. Furthermore, to obtain knowledge that will enable optimizations of the Steamboost technology.
To demonstrate that it is possible to achieve a degree of reuse on 70% by Automatic separation of household waste. It is a further goal to demonstrate that the content of problematic substances in the
The Purpose of this project is to develop a methodoly that can supply cheap biomass for production of 2 generation bioethanol and biogas. This will be done by conditioning animal bedding and
The project work will adress technological aspects of anaerobic digestion (AD). Based on the technical knowledge and expertise of its members the work of the Task 37 provides support to policy makers
The purpose of this project was to improve our understanding of the characteristics and behaviour of char beds both in steady and unsteady operation. The knowledge gained is to be used for
The main conclusions of the survey are: The potential for biogas production from municipal organic waste in Malawi is scarce; The bioenergy potential of the Malawian agro-industries is large, with the
The study tours to Sweden, Finland, Austria, Italy and the USA have given a good insight in how the other countries are establishing the size classification of comminuted fuel.
The project is carried out by representatives of the EFP98 applicants who forwarded project proposals regarding concepts related to energy effective exploitation of waste waster sludge.
In this review a method for evaluation of these technologies is presented together with a spread sheet in which the method has been used for a number of the present conventional technologies. For the
The aim of the project is to encourage the exchange of experience, transfer know how to R and D in connection to extraction and utilization of landfill gas for energy purposes. The IEA-cooperation
The purpose of this work is to develop a dewatering method that can dewater digested manure to a dry matter content that makes it possible to utilise the dry matter for energy production.
Char conversion during gasification was investigated. It was possible to model the conversion rate in a small fixed bed reactor, by using reactivity data. Tar reduction by partial oxidation was