Energy from biomass will be indispensable for a Danish energy system based on 100 % renewables. This project will provide solutions to use the available biomass most efficiently with a high
The aim of this project is to develop the technical foundation for a polygeneration plant based on LT-CFB gasification and zeolite tar-reforming. The system co-produce electricity, heat, bio-oil and
The project aim is to reduce the loss of methane from livestock buildings and pre-tanks while at the same time biogas plants increasing biogas production. The project aims both on quantifying the loss
The purpose of this project is to design and develop a new cheap online multi-pollutant sensor system that can be used to minimize the emissions of harmful particles and gases including tar, soot and
IEA Bioenergy Task works to monitor, review and exchange information on advance in research, development, demonstration an implementation of biomass combustion and confiring technologies and to
The objective of this project is to develop and demonstrate a new, more energy-efficient way of upgrading biogas for the combined production of biomethane and bioCO2. The aim is to improve the
Current state-of-the -art enrym screening assays such as AZCL subtrates are designed to analyse enzyme or culture performance on substrates based on purified purepolysaccharides. Because of that they
The objective of the project is to test and demonstrate the novel Steamboost technology at full scale. Furthermore, to obtain knowledge that will enable optimizations of the Steamboost technology.
To demonstrate that it is possible to achieve a degree of reuse on 70% by Automatic separation of household waste. It is a further goal to demonstrate that the content of problematic substances in the
The Purpose of this project is to develop a methodoly that can supply cheap biomass for production of 2 generation bioethanol and biogas. This will be done by conditioning animal bedding and
The project work will adress technological aspects of anaerobic digestion (AD). Based on the technical knowledge and expertise of its members the work of the Task 37 provides support to policy makers
Wood is a strongly anisotropic material and likewise the char produced by pyrolysis of wood is characterized by a strong anisotropy. This anisotropic behaviour allows relatively easy transport of gas
The 'Clear Views on Clean Fuels' (VIEWLS) project aims to increase our insight into: 1) The economic and environment-technical performances of the various transport biohels, both existing biohels and
The aim is to: verify the final choice of solvent for 'Guideline for Sampling and Analysis of Tar and Particles in Biomass Producer Gas' and to develop an unambiguous method for tar evaporation with
As a continuation of preliminary experiments on super critical water cleaning a process development unit (PDU) for a capacity of 50-60 kg/h will be designed and built.
The target ot the project is to erect 2 meteorological measurement towers east of the offshore wind farm Horns Rev, establishment of the measurement system, performing data collection and validation