The goal of the project is to build intelligent control into photovoltaic (PV) panels to allow for an automatic evaluation of the panel performance in order to bypass panels or section of panels e.g
The project aims to develop a stable bearing solution for the turbine in the air conditioner AC-Sun with a sealing device preventing mixing of the steam flow in the turbine and compressor circuit. The
The purpose of this project is to investigate the technical and commercial potential of a new method to purify raw silicon (Metallurgical Grade silicon or just MG-Si). The fundamental concept for a
It is agreed to realise a EUDP supported project aimed at development, test and documentation of ''Solar Energy Roofs for Energy Renovation'', where there is a special focus on how to obtain the
Transform energy consuming commercial greenhouses into solar energy production units with lightweight solar absorbers interconnected and serviced by an electrical heat pump.
The objective of the project 'Industrialisation of polymer solar cells' is to establish low-cost, massproduction of solar cells in Denmark, and furthermore to demonstrate the potential of polymer
This project aims to support the integration and higher penetration of PV systems into the electrical power systems by advanced grid condition monitoring and grid control, Diagnostics and failure
Eco-friendly production of plastic solar cells in Denmark. Plastic solar cells are almost capable of competing with commercial solar cells. The processing method has environmental consequences in
As a follow-up to PV Island Bornholm, Phase I project targeting implementation of 1 MWp of PV on the island of Bornholm, it is proposed to establish a phase II targeting an additional 1 MWp. The
In the proposed PV-Boost-2015 project coordinated by Gate 21 it is intended to realise 700 kWp innovative BIPV systems in zero energy and low energy class1 and 0 buildings in 7 dif-ferent cities in
The overall strategic objective of PV-ERA-NET is to strengthen Europe's position in photovoltaic (PV) technology by improving the co-operation and co-ordination of PV RTD programming efforts across
The objective of the project has been to achieve a 10% better price performance for ARCON's HT-SA solar collector and to demonstrate the solar collector and measure the production result.
The overall goal with the participation in IEA PVPS is to maintain and build upon the knowledge transfer to Denmark via the participation in the IEA PVPS work.
The aim of the project is to develop and to demonstrate integrated PV options for standard single-family houses with a high degree of industrialized production. This implies the development of an
The project developed a PV cell roof based on a modified industrial installation system for commercial nurseries. Components are non-framed PV cell modules with several novel features, including front
A three-dimensional chemical mapping of active plastic PV cell layers has generated new knowledge of degradation causes for PV cells. Based on the mapping, more stable PV cells were made, which in
The project will continue developing a computer model capable of predicting defect concentrations and distributions as a function of parameters during the float-zone process that produces silicon for