The project relates to participation in international corporation in an annex related to IEA (International Energy Agency) on stationary fuel cells for distributed generation of power in small units
Today most fuel cell stack designs on the market are early generation fuel cells. Technically they have good performance and durability, but they are not developed for mass production, so the
The project wants to establish and develop a 3.G. hydrogen filling station. The project is a part of the H2moves Scandinavia project. H2moves all around goal is partly to demonstrate cars driven by
The FCH test center has had a good start and today it has a big national as well international network with the most important team players within the field. The first commercial assignments have been
HyLIFT-DEMO is to conduct European demonstration of the 3rd generation hydrogen powered fuel cell forklifts and supporting hydrogen refuelling infrastructure. HyLIFT-DEMO has the following objectives
LINK2009 -phase 2 is a continuation of the LINK2009 Phase 1 that was started in August 2008 with support from EUDP2008 (ENS 63011-0069) covering development of 2nd generation fuel cell hybrid vehicles
The main objective in this project has been to develop a tool for SOFC system designing with the aim to accelerate the system optimization and reduce the time to market.
Only the nichemarket is accepting the relatively high prices there is to fine within the fuel cell stack. The high develop costs is holding the stack producers in a spiral characterized by its low
GMR machines and a couple of project participants will develop a prototype and a pilot series of fuel cell driven electrical car. The energy source for the electrical cars comes from a HT-PEM fuel
Energy technology research development and demonstration of 2nd generation alkaline electrolysis by: Improved electrode efficiency. Higher operation temperature. Higher operation pressure. Improved
Fuel cell based backup power and UPS was developed with hydrogen from natural gas, LPG or methanol. Potential customers have shown considerable interest in alternative fuels for fuel cells
LINK2009 is a public private partnership. The objective is to develop state-of-art fuel cell systems for hydrogen vehicles and a 350bar hydrogen refuelling station. In Phase 1 is supported by the
The main goal of this project was to assist in facilitating a successful deployment of micro combined heat and power fuel cells to the benefit of society and the environment taking into consideration
The overall purpose of the HyLift-0 project is to develop a first generation HT-PEM / Li-Ion fuel cell system for a class 3 forklift and benchmark this with an existing LT-PEM fuel cell system
The project worked with three key objectives in the roadmap on Danish fuel cell strategy. Optimisation of fuel cell production, an area in which the project succeeded in saving electricity and raw
The aim of the project is to obtain significant fuel cell performance and cost reductions through component and manufacturing technology development. The project has concentrated on the two key
In the Backup Power segment, the fuel cell units have been developed, certified and delivered. A total of 32 fuel cell backup power systems have been delivered to EnergiMidt. In the material handling
This partnership has developed a model for innovation networks, as well as a website, and a market study was prepared. This study was reproted in four market reports on four product areas and seven