Energy from biomass will be indispensable for a Danish energy system based on 100 % renewables. This project will provide solutions to use the available biomass most efficiently with a high
The aim of this project is to develop the technical foundation for a polygeneration plant based on LT-CFB gasification and zeolite tar-reforming. The system co-produce electricity, heat, bio-oil and
The project aim is to reduce the loss of methane from livestock buildings and pre-tanks while at the same time biogas plants increasing biogas production. The project aims both on quantifying the loss
The purpose of this project is to design and develop a new cheap online multi-pollutant sensor system that can be used to minimize the emissions of harmful particles and gases including tar, soot and
IEA Bioenergy Task works to monitor, review and exchange information on advance in research, development, demonstration an implementation of biomass combustion and confiring technologies and to
The objective of this project is to develop and demonstrate a new, more energy-efficient way of upgrading biogas for the combined production of biomethane and bioCO2. The aim is to improve the
Current state-of-the -art enrym screening assays such as AZCL subtrates are designed to analyse enzyme or culture performance on substrates based on purified purepolysaccharides. Because of that they
The objective of the project is to test and demonstrate the novel Steamboost technology at full scale. Furthermore, to obtain knowledge that will enable optimizations of the Steamboost technology.
To demonstrate that it is possible to achieve a degree of reuse on 70% by Automatic separation of household waste. It is a further goal to demonstrate that the content of problematic substances in the
The Purpose of this project is to develop a methodoly that can supply cheap biomass for production of 2 generation bioethanol and biogas. This will be done by conditioning animal bedding and
The project work will adress technological aspects of anaerobic digestion (AD). Based on the technical knowledge and expertise of its members the work of the Task 37 provides support to policy makers
The aim of the project was to test the recently developed VFA online sensor under long-term operation at a large-scale biogas plant (Lintrup). The goal was to identify requirements of the system for
A model of a updraft gasifier was established. Problems about solving the system of equations was realized. Experimental results about heating up and pyrolising wood chips was created.
The project has included the Danish Representation in the Technical Committee for biomass Utilisation, task 32, Biomass Combustion and Cofiring during 2001. The Activity is referring to the IEA
The main objective is to achieve higher combustion efficiencies and lower environmental impacts of biofuelled boilers by improving process control to take into account variations of the moisture
The objective of the IEA task is to synthesise and transfer to stakeholders important knowledge and new technical information concerning conventional forestry systems for sustainable production of
The main objectives of IEA Task 38 Greenhouse Gas Balances of Biomass and Bioenergy Systems are to calculate, analyse and assess the effects and impacts on greenhouse gas emissions of (1) substitution